622288

Velleman DVM1500 Manual

11
Zoom out
Zoom in
Previous page
1/104
Next page
DVM1500
V. 03 04/11/2013 11 ©Velleman nv
Always be careful when working with voltages above 60 Vdc or 30 Vac
rms. Keep your fingers behind the probe barriers at all times during
measurement. Do not touch unused terminals when the meter is
linked to a circuit that is being tested.
1.  °CHz

2. Set  position.
3. Press the RANGE button to manually select the range.
4. Connect the test probes to the circuit and read the measured value from
the LCD.
Notes:
Accuracy of the reading is not guaranteed for amplitudes > 3 Vrms.
Use a shielded cable for measuring small signals in noisy environments.
Temperature Measurements
Do not touch any live parts with the temperature measuring
probe.
1. °C range. If no temperature measuring
probe is connected, the current ambient temperature is displayed.
2. jack and
 °CHzjack (thermo couple type K).
3. Hold the tip of the temperature probe against the object under test. Read
the temperature on the LCD.
Current Measurements
Do not measure currents in circuits with voltages > 250 V.
Current measuring jack µAmA max. 400 mA.
For currents up to 10 A, use the 10A jack.
Always be careful when working with voltages above 60 Vdc or 30 Vac
rms. Keep your fingers behind the probe barriers at all times during
measurement.
1. For measurements up to 400 mA: connect the red test lead to the

2. For measurements up to 10 A

3. Set the rotary switch to the 400µA range for measurements up to 400 µA
.
4. Set the rotary switch to the 400mA range for measurements up to
400 
5. Set the rotary switch to the 10A range for measurements up to 10 A (only

6. Press the FUNC button to select DC current (DCA) or AC current (ACA)
mode.
7. Connect the test probes in series with the circuit.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM1500 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info