622288
7
Zoom out
Zoom in
Previous page
1/104
Next page
DVM1500
V. 03 04/11/2013 7 ©Velleman nv
pollution which is to be found in a certain environment depends mainly on the
insulation and the enclosure properties. The pollution degree rating of the
DMM indicates in which environment the device may be used.
Pollution
degree 1
No pollution or only dry, nonconductive pollution occurs. The
pollution has no influence (only to be found in hermetically sealed
enclosures).
Pollution
degree 2
Only nonconductive pollution occurs. Occasionally, temporary
conductivity caused by condensation is to be expected (home and
office environments fall under this category).
Pollution
degree 3
Conductive pollution occurs, or dry nonconductive pollution occurs
that becomes conductive due to condensation that is to be
expected (industrial environments and environments exposed to
outside air - but not in contact with precipitation).
Pollution
degree 4
The pollution generates persistent conductivity caused by
conductive dust or by rain or snow (exposed outdoor
environments and environments where high humidity levels or
high concentrations of fine particles occur).
Warning: This device was designed in accordance with EN 61010-1 pollution
degree 2. This implies that certain restrictions in use apply that are related to
pollution which can occur within the environment of use. Refer to the table
above.
This device is only suitable for measurements in Pollution
degree class 2 environments.
6. Description
Refer to the illustrations on page 2 of this manual.
ON/OFF
Switch the meter on or off using this key.
FUNC.
Selection of the DC (default) or AC modes, and the (default) or
modes. This key function is only available in the A and ( )
ranges.
RANGE
Selection of the automatic (default) or manual modes, selection of
manual or auto-ranging modes, selection of ranges in manual
mode. This key function is 
HOLD
Fixes the current value on the display. Press again to return to
normal mode.
REL
Selection of the relative measurement mode. This key function is
CAP ranges.
Switch the backlight on or off using this key. This key function is
not available in the EF- range.
Rotary
switch
Use the rotary switch to select the function and the desired
ranges.
Terminals
VΩ °CHz: Terminal receiving the red test lead for voltage,
resistance, capacitance, diode test, temperature and frequency
measurements.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM1500 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info