22695

VDO Dayton MS 4400 Manual

64
Zoom out
Zoom in
Previous page
1/72
Next page
IMPORTANT INFORMATION
Please read this information carefully and follow all the instructions outlined below.
This will ensure the reliable operation and long service life of your navigation radio.
Keep the packaging and operating instructions in a safe place in order to pass them on
to a subsequent owner in the event of selling the unit at a later date.
A
Only trained personnel may install the unit.
A
Observe automotive industry quality standards.
A
Fire hazard. When drilling, take care not to damage concealed wiring harnesses, the
fuel tank or fuel lines.
A
Never drill into supporting or safety-relevant body parts.
A
Only install the unit in vehicles with a 12-V on-board voltage; connect negative pole to
earth. Installation in unsuitable vehicles (e. g. heavy goods vehicles, buses) results in a risk
of malfunction, damage and fire.
A
Always ensure correct assignment of vehicle connections. Incorrect assignment of the
connections may damage the unit or the vehicle electrical system/ electronics.
Installation in vehicles equipped with standard ISO
connectors
The navigation radio may be installed without major preparation in vehicles equipped
with ISO standard connectors. A few signals may have to be routed to ISO plug A (re-
fer to connection overview of ISO chamber A).
For problem-free installation on vehicles with different connection requirements, ask
your dealer for special cables.
Installation in vehicles without standard ISO connectors
If no adapter leads are available for your vehicle, connect the navigation radio as de
-
scribed in “Electrical connections”.
Taking safety precautions, Fig. 1
A
Before starting work, disconnect the earth lead from the negative terminal of the vehi
-
cle battery in order to prevent short circuits. In this process, observe the vehicle manufac
-
turer’s safety instructions (alarm system, airbag, immobiliser, etc.).
Installation instructions
1
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton MS 4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton MS 4400 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info