22695
70
Zoom out
Zoom in
Previous page
1/72
Next page
Checking the vehicle functions
A
Check the safety-relevant vehicle functions only when the vehicle is stationary, or mov
-
ing at low speed. Only perform the check in an open area.
Brake system, alarm system, lights, immobiliser, speedometer, trip computer, clock.
Checking installation
Press the SETUP button.
Select “System –> Install”.
To check the installation and to configure the system the following functions can then
be used:
System status
Reading the following values:
GPS status: Displays the receiver status. To ensure that the navigation system is
functioning properly “3D position” should be displayed.
Satellites: The number of GPS satellites received. A minimum of 4 satellites should
be received to ensure that location determination is sufficiently accurate.
Speedometer impulses: Speedometer impulses should be displayed here when dri
-
ving if a speedometer signal is connected.
If speedometer impulses are displayed when the vehicle is stationary the speedome-
ter signal may not be suitable.
Direction: If the reversing signal is connected “Backward” should be displayed when
reverse gear is selected.
Mounting angle
Select “Mount. angle” in the installation menu and set the value in accordance with
the mounting position of the unit.
Loudspeaker test
Select “Speaker test” in the installation menu and press OK to check that the loud-
speakers are connected correctly.
Press the CLR button to end the test.
Setting the time zone and time format
Select “Clock/ Date” in the SETUP menu.
Set the required format for the time and date as well as for the time zone applica
-
ble to your location (e.g. “+2.00 GMT” for Central European Summer Time).
Installation instructions
7
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton MS 4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton MS 4400 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info