22695

VDO Dayton MS 4400 Manual

68
Zoom out
Zoom in
Previous page
1/72
Next page
Installing the unit
The navigation radio can be installed into a vehicle’s DIN radio slot using the installa
-
tion bracket provided.
■
Note before installing, Fig. 13:
✎
The radio must be installed horizontally. Deviations of - 10 to + 30 degrees can be
set in the “Mount. angle” menu (see “Checking installation” section). Larger devia
-
tions may result in malfunctions.
✎
A rigid connection to the vehicle body is a prerequisite for correct functioning of
the system
■
Connecting the unit, Fig. 11
1. Connect the GPS antenna connector to the GPS antenna socket on the back of the
unit.
2. Insert antenna plug E into the antenna socket. If necessary, use a suitable antenna
adapter. Use the hook (J) on the back of the unit for secure attachment.
3. Insert ISO plug A (power supply) into the radio ISO socket A’.
4. Insert ISO plug B (loudspeakers) into the radio ISO socket B’.
If extensions are to be connected to the unit (optional):
5. Push all chamber C plugs together and insert them into the radio ISO socket C’. Insert
the green connector C2 between the yellow connector C1 and the blue connector C3.
At least one of these connectors is required for C2 to engage into the socket:
Yellow plug C1: Left chamber of ISO socket C1’.
Green plug C2: Centre chamber of ISO socket C2’.
Blue connector C3: Right chamber of the ISO socket C3’.
■ Mounting the unit, Fig. 8 - 10
1. Insert the installation bracket into the DIN slot and bend the appropriate metal tabs
inwards using a screwdriver (Fig. 8 - 9). Take care not to damage any hidden parts in
the dashboard.
2. Check that all the required leads are connected to the unit.
3. Push the unit into the installation bracket until it engages (Fig. 10).
■
Removing the unit, Fig. 14
1. Detach the removable operating panel.
2. Push both angled removal tools into the small holes to the right and left of the unit
front until they are felt to engage.
3. Gently push the removal tools outwards and carefully pull the radio out of the instal
-
lation bracket.
Installation instructions
5
… 68 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton MS 4400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton MS 4400 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info