484775
6
Zoom out
Zoom in
Previous page
1/34
Next page
© U.S BLASTER Design - USA - P.O. Box 5376 - Carefree - AZ 85377.
USB 7392 - 7393
Microphone systems
FREQUENCY SETTING CHANGE
- To obtain the display required, press the Set button.
- By using the Up & Down buttons, select another channel. The display starts blinking.
- Press the Set button again to confirm your selection.
Change between Frequency/Channel Number displaying:
- Press the Set button and hold it depressed until the LCD shows "DISPLAY".
- After 2 to 3 seconds, the display will show
either FREQ (for frequency) or CHANNL (for channel).
- Select from between the two options by pressing the Up and Down buttons.
- The display starts blinking.
- Confirm your selection by pressing the button.
SENSITIVITY SETTING
Press the SET button and hold it depressed until the L
CD shows “LOCK”.
- After 2 to 3 seconds, the display will show "XX* dB" ( * the value depends on particular settings).
The value is to inform you of the level of the receiver sensitivity.
- The sensitivity setting allows you to set a resistance of the receiver against interferences. The value
can be set within r
ange from 0 to 40dB
. The higher the v
alue, the higher is the resistance against
interferences. The lower the value, the lower is the resistance of the receiver against interferences.
Standard value is 15dB.
- T
o select another channel, use the Up & Down buttons. The displa
y starts blinking.
- Press the Set button again to confirm your selection.
© US Blaster Europe BV
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for US Blaster USB 7393 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of US Blaster USB 7393 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info