484775
4
Zoom out
Zoom in
Previous page
1/34
Next page
© U.S BLASTER Design - USA - P.O. Box 5376 - Carefree - AZ 85377.
USB 7392 - 7393
Microphone systems
4. Frequency Selection Button (Down)
This button (Down) allows you to select a working frequency of the receiver.
It also allows you to change receiver settings.
Note: To ensure a proper function of the HF system, the transmitter (handheld microphone or belt
case) and the receiver must be set to the same working frequency.
5. Frequency Selection Button (Up)
This button (Down) allows you to select a working frequency of the receiver.
It also allows you to change receiver settings.
Note: To ensure a proper function of the HF system, the transmitter (handheld microphone or belt
case) and the receiver must be set to the same working frequency.
6. On/Off Button
This button allows you to turn the receiver on or off.
1. A
-Aerial Connector
Connect the aerial (supplied with the microphone set) to this socket.
2. Power Supply Connector
Connect the DC 12V power supply (supplied with the microphone set) to this socket. Note: Do not
connect other types of power supply (an AC one or a DC one supplying more than 12V). Otherwise,
it may result in damage to the receiver.
3. B-Channel Symmetrical Output
This socket is an audio output for the B-channel of the receiver. Connect this output to the micropho-
ne input of y
our audio mix
er or directly to an input of y
our amplifier
.
Note: It is a symmetrical output. Therefore, use a symmetrical cable and XLR connector.
4. Mix Asymmetrical Output
This sock
et is an audio output mixing both channels. Connect this output to the microphone input of
y
our audio mix
er or directly to an input of y
our amplifier.
Note: It is an asymmetrical output. Therefore, use an asymmetrical cable and 6.35mm jack.
© US Blaster Europe BV
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for US Blaster USB 7393 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of US Blaster USB 7393 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info