484775
5
Zoom out
Zoom in
Previous page
1/34
Next page
© U.S BLASTER Design - USA - P.O. Box 5376 - Carefree - AZ 85377.
USB 7392 - 7393
Microphone systems
5
. A-Channel Symmetrical Output
This socket is an audio output for the A-channel of the transmitter. Connect this output to the micro-
phone input of your audio mixer or directly to an input of your amplifier.
N
ote: It is a symmetrical output. Therefore, use a symmetrical cable and XLR connector.
6. A-Aerial Connector
Connect the aerial (supplied with the microphone set) to this socket.
PUTTING THE RECEIVER INTO OPERATION
- Connect both aerials to the sockets designed for them (A and B).
- Direct them to a 90Y direction in relation to the receiver.
- Connect the DC 12V power supply to the power supply connector.
Warning: Do not connect other types of power supply (an AC one or a DC one supplying more than
12V). Otherwise, it ma
y result in damage to the receiver..
- Set the volume adjustment buttons for each channel to minimum and, then, press the On/Off but-
ton and hold it depressed for 1 to 2 seconds.
- By using the Up and Down buttons, set working frequencies for each channel and, then, confirm the
frequencies by pressing the Set button.
Note: Receiver are specifications are included below in this operating manual.
- To turn the receiver off, press the On/Off button (2) and hold it depressed for 1 to 2 seconds. The
LCD will show “SYSOFF”.
LCD DISPLAY DESCRIPTION
1. RF Indicator
It indicates the level of RF signal (the signal received from the microphone).
2. AF Indicator
It indicates the lev
el of AF signal (channel output signal).
3. Working frequency
It indicates the frequency used in operation.
4. A Aerial Indicator
As it is a selective reception receiver, it chooses the aerial via which the reception is the best. If the
display shows 1, it means that reception is carried out by means of the A aerial.
5. B Aerial Indicator.
As it is a selective reception receiver, it chooses the aerial via which the reception is the best. If the
display shows Il, it means that reception is carried out by means of the B aerial.
6. Sound Attenuation Indicator
This logo is to inform you of the fact that the unit operates in the “mute” mode (that means that no
sound is at the channel output – either nobody speaks into the microphone or the receiver frequen-
cy differs from the transmitter frequency).
© US Blaster Europe BV
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for US Blaster USB 7393 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of US Blaster USB 7393 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info