652907

Uebe Visomat Double Comfort Manual

26
Zoom out
Zoom in
Previous page
1/70
Next page
English
English
EN-50 EN-51
Operating the deviceOperating the device
CC
• Lie on your back. Look up at the ceiling
during the measurement. Keep still and
do not move.
• Ensure that the measuring point on the
upper arm is approximately level with your heart. If the meas-
uring point is lower than the heart, the measured values may
be higher. If the measuring point is higher than the heart, the
measured values may be lower.
The results for measurements taken in a sitting and lying position
may dier slightly.
• Put your feet on the oor and do not cross your legs.
Measurement in a lying position
The device is designed for two users. The values for the two users
are stored separately and can also be evaluated separately.
Also, you will be given another opportunity to assign the meas-
urement to the correct user after the measurement has been
taken (see page 52).
• Before taking the measurement, check that the correct user
is displayed.
• To change the user, press the user button for whose memory
bank you want to switch over to.
• Now carry out the measurement.
You may also use the two user memories to evaluate measure-
ments taken in morning and those taken in the evening separate-
ly. To do this, carry out the measurement in the morning using
user 1 and in the evening using user 2.
9. Selecting the user
• Switch the device on using the Start/Stop
button. The following display appears (Fig-
ure 1):
• After the device has completed its calibra-
tion against the ambient air pressure (Fig-
ure2), the automatically controlled ination
process starts. The cu is inated to the
pressure required for measurement.
10. Measuring blood pressure
Figure 1
• Shortly after the ination procedure be-
gins, a check is carried out to ensure that
the cu has not been applied too loosely. If
the cu is applied correctly, the
symbol
is displayed. If the symbol is not displayed
by the time the pulse signal starts, the cu
is too loose. In this case, you should repeat
the measurement after you have applied the
cu correctly (see page 48).
• The actual measurement process then
begins as the cu deates. The
symbol
ashes in the display (Figure 3). In addition, beeps denote the
pulse.
Figure 3
Figure 2
• A long beep denotes the end of measure-
ment. The cu is automatically deated.
• The determined systole, diastole and pulse
values, as well as the pulse pressure (PP) are
shown in the display (Figure 4).
Figure 4
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebe Visomat Double Comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebe Visomat Double Comfort in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Uebe Visomat Double Comfort

Uebe Visomat Double Comfort User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info