652907
25
Zoom out
Zoom in
Previous page
1/70
Next page
English
English
EN-48 EN-49
Operating the deviceOperating the device
CC
Now pull the free end of the cu tight
and close the Velcro fastener (Figure 5).
Check that the measurement arrow
on the cu is within the „Marking for
arm circumference“ on the cu edge
(Figure 6).
With the device switched o, hold down both memory buttons
simultaneously for three seconds to enable the date and time to
be set. Perform the setting as described on page 46.
If you take the opportunity to evaluate your blood pressure val-
ues on a PC, the date and time are automatically compared with
your PC’s system time during the data transfer. In case of devia-
tions, a query will appear on the PC screen asking whether the
device’s date and time should be adjusted.
Before applying the cu, please check that
the circumference of your upper arm is with-
in the range specied on the cu. An incorrect
cu size could result in inaccurate readings.
Expose your upper arm.
Push the cu onto the arm until the
lower edge of the cu is 2-3 cm above
the crook of the arm (Figure 1, Figure 2).
7. Attaching the cu
When placed on the left arm, the air
hose runs down the middle of the
crook of the arm to the device. This
automatically positions the 4-cm long
artery marking and the microphone
above the pulse position (Figure 3).
When placed on the right arm, the cu
must be rotated to the left until the ar-
tery marking and the microphone are
above the pulse position. The air hose
then runs along the inner side of the upper arm (Figure 4).
Figure 3
Figure 4
Figure 1
Figure 2
Figure 5
Figure 6
Changing the date/time
Connect the plug of the cu to the cu
connection on the left-hand side of
the device (Figure 7). Ensure that the
cu connector’s microphone plug is
plugged rmly into the device.
Place the arm with the cu on a table so that
it is loosely stretched out and hold it very
still during the measurement, do not talk.
The palm of your hand should be facing up-
wards.
Figure 7
Sit at a table (preferably at the height of a dining table, not a
coee table).
Measurement in a sitting position
The measurement should preferably be performed in a sitting
position. Measurements in a lying position are also permitted in
exceptional cases. The body must be in a relaxed position.
8. Body position during the measurement
Rest your entire lower arm on the table with
the palm facing upwards.
Sit with your back against the backrest of the
chair.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Uebe Visomat Double Comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Uebe Visomat Double Comfort in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Uebe Visomat Double Comfort

Uebe Visomat Double Comfort User Manual - German - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info