756394
14
Zoom out
Zoom in
Previous page
1/33
Next page
14 EN
thermal imaging camera XC300 / XC600
5. Leave the Settings menu.
ðThe quick launch button is activated and displayed.
6. Press and hold the quick launch button to move it to the
desired position.
7. Briefly press the quick launch button to open the Image
menu.
Inserting/ Changing the lens
Info
The camera automatically recognizes which lens has
been connected, and automatically uses the calibration
curve stored for this lens. For this purpose, however,
the lens must first be calibrated for the respective
camera. Otherwise, there is a danger of the camera
displaying incorrect values. The lens included in the
scope of delivery has already been calibrated for the
camera by the manufacturer prior to delivery. When
ordering additional lenses, please contact the
manufacturer for calibration.
Proceed as follows to equip the camera with a suitable Trotec
lens:
1. Place the lens on the camera as shown below. Before
attaching the lens, align the three round holes as shown in
the illustration. Otherwise, automatic recognition will not
work later on. If necessary, slightly turn the lens in both
directions until the grooves noticeably engage in the
corresponding pins inside the lens mount.
2. Rotate the lens clockwise until it is firmly attached to the
camera head.
Data transfer via USB
You can either access and read out the data stored on the
device using a USBtypeC data cable, or transfer the data to the
software (optional PRO version) in real time and thus record fully
radiometric infrared videos.
To do so, first select the desired transmission mode in the
settings:
USB Mode (data memory access)
Trans. (real-time data transmission to software)
1. Press the C button(17) on the control panel(2) or tap the
Trotec logo on the display(1).
ðThe main menu is displayed on the left-hand side of the
display.
2. Select the Settings menu.
3. Select the System menu.
4. Select the Control menu.
5. Press the USB Mode button.
6. Swipe to select the desired transmission mode.
7. Leave the Settings menu.
8. Connect the supplied microUSB data cable to the device.
9. Connect the data cable to a PC or notebook.
Info
You also have to start data transmission in the
software (optional PRO version) in order to connect the
device.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec XC600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec XC600 in the language / languages: English as an attachment in your email.

The manual is 9,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec XC600

Trotec XC600 User Manual - German - 33 pages

Trotec XC600 User Manual - Dutch - 32 pages

Trotec XC600 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info