756394
13
Zoom out
Zoom in
Previous page
1/33
Next page
EN 13
thermal imaging camera XC300 / XC600
5. The object to be thermographed is sharply focussed.
35.6
28.4
ºC Emiss: 0.95 Dist: 1.5 14:23
2.
1.
35.6
28.4
ºC Emiss: 0.95 Dist: 1.5 14:23
Setting the zoom factor
1. Drücken Sie die TasteF(21), sofern diese blau leuchtet.
ðDie TasteF wechselt die Farbbeleuchtung von blau zu
grün.
ðDie Auto-Fokus-Funkion ist deaktiviert.
2. Drücken Sie gleichzeit die
Pfeiltastelinks/LEVELrunter(20) und die
Pfeiltastehoch/SPANauseinander(23) bis die gewünschte
Vergrößerung eingestellt ist.
3. Drücken Sie gleichzeit die
Pfeiltastelinks/LEVELrunter(20) und die
Pfeiltasterunter/SPANzusammen(18) bis die gewünschte
Verkleinerung eingestellt ist.
Taking/recording an infrared image/video
Info
You can also assign this function to the multifunction
button(5). Further information on the multifunction
button is provided in the chapter Configuring the
multifunction button.
Recording of IR images and videos can be started from the main
menu.
1. Press the C button(17) on the control panel(2) or tap the
Trotec logo on the display(1).
ðThe main menu is displayed on the left-hand side of the
display.
2. Select the Media menu.
Please proceed as follows to record and save an infrared image:
1. Press the Snapshot button.
ðThe photo is taken and saved.
ðThe storage path of the recorded infrared image is
briefly shown on the display.
ðThe Media menu is displayed again.
Please proceed as follows to record and save a video:
1. Press the Video button.
ðThe recording is started.
ðA recording icon (red circle) and the recording time
appear in the middle of the top display edge.
2. Press the Video button again to stop recording.
ðThe video is saved.
3. Press the Play button, to play the recorded video directly
on the display.
Configuring the multifunction button
The multifunction button(5) can be assigned with various
functions.
Setting Function
Lock Shutter function for calibration
Freeze Activate or deactivate freezing the image
Snapshot Taking a picture
Laser Switching the laser on or off
LED Switching the LED on or off
Please proceed as follows to configure the multifunction button:
1. Press the C button(17) on the control panel(2) or tap the
Trotec logo on the display(1).
ðThe main menu is displayed on the left-hand side of the
display.
2. Select the Settings menu.
3. Select the System menu.
4. Select the Control menu.
5. Press the Multi-Func Key button.
6. Select the desired setting.
7. Leave the Settings menu.
ðThe desired setting is saved.
Configuring the quick launch button
The quick launch button allows fast access to the Image menu
and can be freely positioned on the screen.
Please proceed as follows to activate / deactivate the quick
launch button:
1. Press the C button(17) on the control panel(2) or tap the
Trotec logo on the display(1).
ðThe main menu is displayed on the left-hand side of the
display.
2. Select the Settings menu.
3. Select the Image menu.
4. Activate the quick launch button by sliding the selector
switch to the right.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec XC600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec XC600 in the language / languages: English as an attachment in your email.

The manual is 9,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec XC600

Trotec XC600 User Manual - German - 33 pages

Trotec XC600 User Manual - Dutch - 32 pages

Trotec XC600 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info