756407
8
Zoom out
Zoom in
Previous page
1/12
Next page
8 EN
pyrometer TP10
Using the Save function
1. Repeatedly press the Mode button(3) until the MxMn Save
Avg menu is displayed.
2. Press the F2 button(5) to select Save.
ðThe Yes and Esc menus are shown on the display.
3. Press the F1 button (Yes) to save the measured value.
ðIt takes a short moment until the measured value will be
saved. The Saving indication(17) lights up on the
display. After that the display(1) shows the last
measured value again.
4. Or you press the F3 button(2) (Esc) to cancel the
operation.
ðThe last measurement will be displayed.
Using the Memory function
Using the Memory function you can call up values previously
saved with the Save function. The device comes with 30 internal
storage locations.
1. Repeatedly press the Mode button(3) until the Unit Mem Ɛ
menu is displayed.
2. Press the F2 button(5).
ðThe last saved value appears on the display.
ðThe Set menu will be displayed.
3. Either press F3 or F1 to view the saved values.
4. Press the F2 button(5) to select Del.
ðYou will now see the Yes All Esc menu.
5. If you want to delete a measured value (Yes), press the F1
button(4).
ðThe currently displayed measured value will be deleted.
6. If you want to delete all measured values (All), press the F2
button(5).
ðAll saved measured values will be deleted.
7. If you want to cancel the operation (Esc), press the F3
button(2).
ðThe Del menu is shown on the display.
8. Press the Mode button(3) to return into measuring mode.
Setting the temperature unit
1. Repeatedly press the Mode button(3) until the Unit Mem Ɛ
menu is displayed.
2. Press the F1button(4).
ðThe Unit °C °F menu is shown on the display.
3. Press the F2button(5) for °C or the F3button(2) for °F.
Setting the degree of emission
1. Repeatedly press the Mode button(3) until the Unit Mem Ɛ
menu is displayed:
2. Press the F3 button.
ðThe last saved value for the degree of emission appears
on the display.
ðThe Tab menu will be displayed.
3. Either press F3 or F1 to change the degree of emission.
ðThe value range is between 0.10 and 1.00.
ðThe selected setting will be saved automatically.
4. Press the F2 button to select a specific degree of emission.
ðThe Tab menu will be displayed.
ðA list with different degrees of emission will be
displayed:
Default 0.95
0x Aluminium 0.30
0x Brass 0.50
0x Copper 0.60
Paint 0.93
5. Either press F3 or F1 to select a specific degree of
emission.
6. Confirm the selection by pressing F2.
ðThe new degree of emission is set.
7. Press the Mode button(3) to leave the menu.
Info
A set specific degree of emission will not be stored in
the device, after it has been switched off. When being
switched on again, the device will always return to the
degree of emission previously set by hand.
De-/activating continuous measurements
Once the function is activated, the measurement will continue
until the function is terminated again. Within this time frame
settings can only be made in the following menu:
Lit Laser
1. Repeatedly press the Mode button(3) until the Lit Laser
menu is displayed.
2. Press the F1button(4).
ðContinuous measurement is activated.
ðThe On menu will be displayed.
3. Press the F1button(4).
ðContinuous measurement is deactivated.
ðThe Lit Laser menu is displayed.
Adjusting the display illumination
Ex works the display illumination is switched off. There are two
ways to adjust the display illumination.
Option 1: Via the menu. To do so, please proceed as follows:
1. Repeatedly press the Mode button(3) until the Lit Laser
menu is displayed.
2. Repeatedly press the F2 button(5) until the display is
illuminated as desired.
Option 2: Via the additional settings. To do so, please proceed
as follows:
1. Repeatedly press the Mode button(3) until the Hi Set Lo
menu is displayed.
2. Press the F2 button(5).
ðThe Set menu will be displayed.
3. Either press F3 or F1 to select the Backlight option.
4. Confirm the selection by pressing the F2button(5).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TP10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TP10 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TP10

Trotec TP10 User Manual - German - 13 pages

Trotec TP10 User Manual - Dutch - 13 pages

Trotec TP10 User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info