756407
10
Zoom out
Zoom in
Previous page
1/12
Next page
10 EN
pyrometer TP10
3. Press the F2 button(5) to enable (On) or disable (Off) the
upper alarm threshold.
ðWith enabled upper alarm threshold the indication
Hi(17) will be displayed.
4. Either press F3 or F1 to set the value.
ðFor larger temperature changes hold onto these buttons,
as needed.
5. Press the Mode button(3) to return to the measurement
value display.
ðThe setting for the upper alarm threshold is saved.
Info
The device memorizes the selected setting when
switching off.
Further setting options
In the submenu Set you can make further settings for the
device.
1. Repeatedly press the Mode button(3) until the Hi Set Lo
menu is displayed.
2. Press the F2 button(5).
ðThe Set menu will be displayed.
ðThe following list of setting options will be displayed:
Option Setting options
Time Setting the time
Date Setting the date
Backlight Adjusting the display illumination
Buzzer Setting the touch tone and alarm
sound
Contrast Setting the display contrast
APO Time Setting the automatic switch-off
Send Data De-/activating the USB function
3. Select the desired setting option by use of F3 or F1.
4. Confirm the selection by pressing F2.
5. Select the desired setting by use of F3 or F1.
6. Press the Mode button (3) to confirm your selection.
ðThe desired settings are saved.
USB port
Via the USB port(11) you can connect the device to a PC. While
connected, the device will be supplied with power via the PC.
Consequently, the device can be operated without battery for
the duration of the connection.
1. Open the lateral sealing cap of the device.
2. Attach the USB cable to the USB port(11) of the device.
3. Connect the USB cable to a PC.
ðWait for a few seconds until the connection is
established.
De-/activating the USB function
Info
Activating the USB function is not required, if you only
want to use the USB port for the sake of ensuring the
power supply for the measuring device. The USB
function is only required for the software-supported
recording of measurement series in real time.
1. Repeatedly press the Mode button(3) until the Hi Set Lo
menu is displayed.
2. Press the F2 button(5).
ðThe Set menu will be displayed.
3. Select Send Data and press the F2 button.
ðYou can now choose between Real Time and Memory.
4. Select Real Time, if you want to activate the USB function.
5. Press the F2button(5) to switch between On (enable) and
Off (disable).
6. Press the Mode button(3) to confirm your selection.
ðDepending on your selection the USB function is now
de-/activated.
7. If you want to transfer the measured values saved in the
device to the PC, select Memory and confirm with OK.
ðUSB mode will then be activated for the transmission
period and afterwards return to inactive state.
Using the software for recording measurement series
Make sure the device is connected to a PC via USB cable.
Make sure that the software for recording measurement
series required for USB operation is installed on the PC.
Make sure that the USB function is activated.
During the entire measuring procedure, both the temperature
values of the infrared sensor and those of the external type K
sensor (if connected) will be transmitted to the software and
recorded.
Info
The supplied software is a complimentary bonus that
does not belong to the standard scope of delivery and
is offered for use without support or warranty. The
program interface (only available in the English
language) is generally easily comprehensible and can
be used intuitively. Further information regarding the
use is provided in the application.
Using external sensors (contact sensor type K)
In addition to the non-contact temperature measurement, the
measuring device can be used for contact measurements using
an external type K contact sensor.
1. Open the lateral sealing cap of the device.
2. Connect the contact sensor to the miniature contact pin
connection(10) of the device.
ðIt takes a few seconds until the sensor is detected.
ðDuring the measurement the contact sensor's measured
value is indicated in the lower measurement value
display(20).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TP10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TP10 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TP10

Trotec TP10 User Manual - German - 13 pages

Trotec TP10 User Manual - Dutch - 13 pages

Trotec TP10 User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info