753364
12
Zoom out
Zoom in
Previous page
1/21
Next page
12 EN
170W multi-function tool PMTS 01-230V
Using a tool with mandrel
The following tools are mounted by means of a corresponding
mandrel:
Polishing attachments(23)
Cutting discs(8)
Abrasive wheels(9)
Abrasive belts(24)
To mount the tool on the mandrel, please proceed as follows:
Polishing attachments:
1. Insert the mandrel for polishing attachments(21) into the
device as described in the chapter "Tool change".
2. Press the spindle lock(3) button and keep it pressed.
3. Screw the polishing attachment(23) onto the thread of the
mandrel in clockwise direction and then let go of the
spindle lock(3) button again.
23
21
Cutting discs/abrasive wheels:
1. Insert the mandrel for cutting discs/abrasive wheels(20)
into the device as described in the "Tool change" chapter.
2. Press the spindle lock(3) button and keep it pressed.
3. Unscrew the screw(40) from the mandrel by turning the
screw in counter-clockwise direction.
40
4. Place a cutting disc(8) or abrasive wheel(9) between the
two washers(41) onto the screw(40) and tighten it to the
mandrel again in clockwise direction.
41
5. Release the button of the spindle lock(3) again.
Abrasive belt:
1. Insert the mandrel for abrasive belts(10) into the device as
described in the chapter "Tool change".
2. Press the spindle lock(3) button and keep it pressed.
3. Turn the screw(40) on the mandrel in counter-clockwise
direction until it has a little backlash.
40
4. Place the abrasive belt(24) onto the rubberized holder and
tighten the screw(40) again in clockwise direction.
24
5. Release the button of the spindle lock(3) again.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS01-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS01-230V in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS01-230V

Trotec PMTS01-230V User Manual - German - 22 pages

Trotec PMTS01-230V User Manual - Dutch - 22 pages

Trotec PMTS01-230V User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info