753364
11
Zoom out
Zoom in
Previous page
1/21
Next page
EN 11
170W multi-function tool PMTS 01-230V
6. Screw the clamping nut(39) onto the collet chuck holder in
clockwise direction(38) and tighten the clamping nut(39)
using the wrench(22). Then let go of the spindle lock(3).
Tool change
Wear protective gloves
Wear appropriate protective gloves when inserting or
exchanging tools.
Note
Never actuate the spindle lock(3) button while the tool
is running! This may damage the tool.
Info
Before changing the tool, check whether the suitable
collet chuck is mounted and replace it, if necessary.
In order to change the tool, proceed as follows:
1. Press the spindle lock(3) and keep it pressed.
2. Slowly rotate the tool holder(27) to the locking point until
the locking mechanism is fixed.
3. Unscrew the clamping nut(39) using the wrench(22) by
turning it in counter-clockwise direction. It is not necessary
to fully unscrew the clamping nut.
4. Remove the tool from the tool holder(27), if any.
39
5. Insert the tool required into the tool holder(27).
6. Tighten the clamping nut(39) using the wrench(22) and
let go of the spindle lock(3).
7. Make sure that the tool is attached securely.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS01-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS01-230V in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS01-230V

Trotec PMTS01-230V User Manual - German - 22 pages

Trotec PMTS01-230V User Manual - Dutch - 22 pages

Trotec PMTS01-230V User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info