753364
13
Zoom out
Zoom in
Previous page
1/21
Next page
EN 13
170W multi-function tool PMTS 01-230V
Using a flexible shaft
Note
Never actuate the spindle lock(3) button while the tool
is running! This may damage the tool.
Info
Use the flexible shaft for tasks requiring fine and
precise guidance of the tool.
üThere is no tool in the tool holder(27).
üThe 3.2mm collet chuck(14) is mounted.
1. Unscrew the union nut(28) on the tool by turning the nut in
counter-clockwise direction.
28
2. Slightly pull the inner axis(30) from the union nut(31) of
the flexible shaft.
3. Clamp the inner axis(30) into the tool holder(27) by
proceeding as described in the chapter "Tool change.
4. Slide the union nut(31) of the flexible shaft over the tool
holder(27) and tighten it in clockwise direction.
31
30
Proceed as follows to clamp a tool on the handle(34) of the
flexible shaft:
1. In order to block the spindle at the handle(34), insert the
locking wrench(16) into the spindle lock(33).
2. Slowly turn the tool holder(27) to the locking point until
the locking wrench(16) fully engages with the lock and
fixes it.
3. Loosen the clamping nut(35) by means of the wrench(22)
by turning it in counter-clockwise direction.
33
35 16
34
4. Remove the tool from the tool holder(27), if any.
5. Insert the tool required into the tool holder(27).
6. Tighten the clamping nut(35) in clockwise direction using
the wrench(22).
7. Remove the locking wrench(16) from the spindle lock(33).
8. Check the tool for tight fit.
Warning of hot surface
Ensure that the flexible shaft does not form a loop or
become kinked during operation. There is a risk of the
shaft becoming hot and melting with the hose.
Do not touch the handle if it became hot. Risk of burns.
Using the positioning fixture
Info
The positioning fixture(25) allows for exact, vertical
milling of a groove maintaining a defined depth setting
at the same time. Furthermore, the positioning fixture
enables working with a lateral limit stop.
1. Unscrew the union nut(28) on the tool by turning the nut in
counter-clockwise direction.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS01-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS01-230V in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS01-230V

Trotec PMTS01-230V User Manual - German - 22 pages

Trotec PMTS01-230V User Manual - Dutch - 22 pages

Trotec PMTS01-230V User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info