753364
10
Zoom out
Zoom in
Previous page
1/21
Next page
10 EN
170W multi-function tool PMTS 01-230V
2. Slide the additional handle(6) onto the tool. Make sure that
the coded projections(37) are locked in the coded
groove(36) in each case.
26 6
37
36
28 26
3. Tighten the fixing screw(26) of the additional handle(6) in
clockwise direction.
4. Check the additional handle(6) for tight fit.
5. For disassembly, unscrew the fixing screw(26), remove
the additional handle(6) and put on the union nut(28)
again.
Replacing the collet chuck
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Wear protective gloves
Wear appropriate protective gloves when inserting or
exchanging tools.
Note
Never actuate the spindle lock(3) button while the tool
is running! This may damage the tool.
Info
If you want to use the 2mm twist drill bit or another
tool with a 2mm shank the collet chuck must be
replaced.
Please proceed as follows:
1. Press the spindle lock(3) button and keep it pressed.
2. Slowly rotate the tool holder(27) to the locking point until
the locking mechanism is latched.
3. Unscrew the clamping nut(39) in counter-clockwise
direction using the wrench(22).
3
39
22
4. Remove the 3.2mm collet chuck(14) from the collet
chuck holder(38).
14
38
5. Insert the 2.3mm collet chuck(13) into the collet chuck
holder(38).
13
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS01-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS01-230V in the language / languages: English as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS01-230V

Trotec PMTS01-230V User Manual - German - 22 pages

Trotec PMTS01-230V User Manual - Dutch - 22 pages

Trotec PMTS01-230V User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info