753919
12
Zoom out
Zoom in
Previous page
1/19
Next page
12 EN
3-in-1 multi-functional sander PMSS 10-220
When using the orbital sanding plate, you can also use sanding
sheets without Velcro backing.
Note
When using unperforated sanding sheets, the dust
extraction system cannot be used.
Note
When cutting the sanding sheet to size, make sure that
the sanding sheet is larger than the orbital sanding
plate.
Otherwise, you cannot fix the sanding sheet in the
clamping bracket.
Proceed as follows:
1. Fold down the locking lever(5) on one side of the device to
open the corresponding clamping bracket(4).
45
2. Slide the sanding sheetwith its smooth bottom side under
the open clamping bracket.
3. Fold the locking lever(5) back up to close the clamping
bracket(4). Fix the locking lever at the orbital sanding
plate again.
ðThe sanding sheet is now fixed on one side by the
clamping bracket.
45
4. Guide the sanding sheet tightly along the orbital sanding
plate to the other clamping bracket.
5. Repeat steps1 to 3.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMSS 10-220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMSS 10-220 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMSS 10-220

Trotec PMSS 10-220 User Manual - German - 21 pages

Trotec PMSS 10-220 User Manual - Dutch - 20 pages

Trotec PMSS 10-220 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info