753919
10
Zoom out
Zoom in
Previous page
1/19
Next page
10 EN
3-in-1 multi-functional sander PMSS 10-220
1. Loosen the four screws(9) at the random orbital sanding
plate(3).
ðThe random orbital sanding plate is now loosened.
2. Remove the random orbital sanding plate(3) from the
device.
9
3
3. Adjust the flange(16) for the selected sanding plate. The
threaded holes(17) for the screws must be aligned with
the marks(18) on the device.
16
17
18
4. Check the felt ring(21) for correct fit.
21
5. When mounting the orbital sanding plate(6) or the delta
sanding plate(14), insert the four rubber pins(10) into the
sanding plate so that the latching noses sit in the
recesses(19).
10
19
6
14
19
10
6. Place the orbital sanding plate(6) or delta sanding
plate(14) onto the flange(16). When mounting the orbital
sanding plate, the arrow(20) must point to the front. When
mounting the delta sanding plate, the tip must point to the
front.
7. Pay attention that the rubber pins(10) are positioned in the
recesses(19) in the device. The rubber pins ensure that
the sanding plate is fixed in position.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMSS 10-220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMSS 10-220 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMSS 10-220

Trotec PMSS 10-220 User Manual - German - 21 pages

Trotec PMSS 10-220 User Manual - Dutch - 20 pages

Trotec PMSS 10-220 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info