753919
11
Zoom out
Zoom in
Previous page
1/19
Next page
EN 11
3-in-1 multi-functional sander PMSS 10-220
8. Press the sanding plate onto the flange(16) until it clicks
into place.
9. Tighten the four screws(9).
6
10
19
9
16
20
14
16
10
9
19
10. Check the sanding plate for tight fit.
Changing the sanding sheet
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Note
Make sure to exchange the sanding sheet in due time.
Otherwise the sanding sheet might tear and cause
damage to the workpiece.
Note
The sanding sheet must not be kinked.
The sanding sheet can be exchanged for processing different
materials. Moreover available are different grain sizes for coarse
to fine sanding. It might be necessary to adjust the speed
according to the new sanding sheet.
You can attach the sanding sheet to the sanding plate using the
Velcro backing.
Note
Sanding accessories such as fleece and polishing felt
are attached to the sanding plate in the same way.
1. Before attaching a new sanding sheet, remove dust and
dirt from the sanding plate e.g. using a brush. Tap off the
dust from the sanding plate's Velcro backing to ensure
optimum adhesion.
2. Place the sanding sheet(8) with its smooth bottom side on
the sanding plate so that it fits exactly. The dust extraction
holes of the sanding sheet and sanding plate should be
aligned precisely.
8
3. Firmly press the sanding sheet down.
4. To exchange or remove the sanding sheet, simply pull it off
the sanding plate.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMSS 10-220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMSS 10-220 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMSS 10-220

Trotec PMSS 10-220 User Manual - German - 21 pages

Trotec PMSS 10-220 User Manual - Dutch - 20 pages

Trotec PMSS 10-220 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info