756404
9
Zoom out
Zoom in
Previous page
1/18
Next page
EN 9
pyrometer controlled via smartphone BP21WP
Measurement settings
Proceed as follows to adjust the settings for the measurement:
1. Press the Menubutton(11).
ðThe context menu opens.
2. Adjust the settings as required.
13
14
15
16
MEASUREMEN
TS
Reports CUSTOMERS SETTINGSSensors
Refresh measured value
Reset min/ max/ Ø
Disconnect sensor
Sensor settings
Start recording
BP21WP
Temperature[24,7 | 25,4] Ø 25 25,3 °C
25,3 °C
No. Designation Meaning
13 Reset min/ max/ Ø
button
Deletes the determined values.
14 Disconnect sensor
button
Disconnects the connected
appSensor from the terminal device.
15 Sensor settings
button
Opens the settings menu for the
connected appSensor.
16 Start recording
button
Starts a recording of the determined
measured values for later evaluation.
Recording measured values
Proceed as follows to record measured values for later
evaluation:
1. Press the Menubutton(11).
ðThe context menu opens.
2. Press the Start recording button(16).
ðA menu listing different measurement methods will be
displayed:
Individual spot measurement without image
Individual spot measurement with image
Matrix measurement without background image
Matrix measurement with background image
If you select one of the measurement methods, you will be
redirected to the respective submenu and the RECbutton(17)
will displayed instead of the Menubutton(11).
Performing an individual spot measurement without image
The individual spot measurement without image allows you to
record several individual measuring points. To do so, please
proceed as follows:
1. Repeatedly press the On/ off/ measurement button(3) on
the appSensor or the Refresh measured value button(10)
on the terminal device until you have logged all the
required measured values.
Sensors MEASUREMEN
TS
Reports CUSTOMERS SETTINGS
Refresh measured value
17
10
9
18
Temperature[24,7 | 25,4] Ø 25 25,3 °C
BP21WP
24,7 25,4
24,9
No. Designation Meaning
9 Numeric value
display
Indicates the minimum, maximum and
average values for the temperature as
well as the current temperature value.
10 Refresh measured
value button
Performs an individual measurement
and refreshes the displayed values.
17 RECbutton Opens the context menu for sensors.
18 Measurement
series indication
Indicates the measured values of the
measurement series in degrees
Celsius.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BP21WP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BP21WP in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BP21WP

Trotec BP21WP User Manual - German - 18 pages

Trotec BP21WP User Manual - Dutch - 17 pages

Trotec BP21WP User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info