756404
8
Zoom out
Zoom in
Previous page
1/18
Next page
8 EN
pyrometer controlled via smartphone BP21WP
Switching the multi-point laser on/ off
1. Briefly actuate the On/ off/ measurementbutton(3) at the
appSensor twice to switch on the multi-point laser.
2. Briefly actuate the On/ off/ measurementbutton(3) at the
appSensor two times again to switch the multi-point laser
off.
Info
Please note that the multi-point laser does not serve
for temperature measurements but is instead used as
aiming aid for the surface to be measured.
Carrying out a measurement
Info
Note that moving from a cold area to a warm area can
lead to condensation forming on the device's circuit
board. This physical and unavoidable effect can falsify
the measurement. In this case, the app will either
display incorrect measured values or none at all. Wait a
few minutes until the device has become adjusted to
the changed conditions before carrying out a
measurement.
1. Make sure that the surface to be measured is free of dust,
dirt or similar substances.
2. To be able to gain exact measurement results on surfaces
which reflect heavily, stick matt masking tape to the
surface or apply matt black paint with a very high and
known degree of emission.
3. Note the 10:1ratio of the distance to the measuring spot
diameter. For accurate measurements the measuring
object should be at least twice as large as the measuring
spot.
Individual value measurement
When the appSensor has been successfully connected to the
terminal device, an individual value measurement is started and
the first determined value will be indicated.
Sensors MEASUREMEN
TS
Reports CUSTOMERS SETTINGS
Refresh measured value
11
10
12
9
BP21WP
25,3 °C
Temperature[24,7 | 25,4] Ø 25 25,3 °C
No. Designation Meaning
9 Numeric value
display
Indicates the minimum, maximum and
average values for the temperature as
well as the current temperature value.
10 Refresh measured
value button
Performs an individual measurement
and refreshes the displayed values.
11 Menubutton Opens the menu for making settings
for the current measurement.
12 Numeric value
display
Indicates the most recently
determined temperature value.
Refreshing the measured value
Proceed as follows to refresh the measured values in the
individual value measurement mode:
1. Press the Refresh measured value button(10) on the
terminal device.
ðThe appSensor determines the current measured value
which is then displayed on the terminal device.
2. You can also press the On/ off/ measurement button(3)
on the appSensor.
ðThe appSensor determines the current measured value
which is then displayed on the terminal device.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BP21WP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BP21WP in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BP21WP

Trotec BP21WP User Manual - German - 18 pages

Trotec BP21WP User Manual - Dutch - 17 pages

Trotec BP21WP User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info