548204
32
Zoom out
Zoom in
Previous page
1/41
Next page


There are several parts to this
procedure:
•To adjust right brake pad
clearance to the disc
1. Turn the fixed
pad adjuster
(Figure 31).
2. If the pads
cannot be
adjusted
properly in this
manner, follow
the instruc-
tions To adjust
left brake pad
clearance to the
disc, and re-set
the right pad.
To adjust left brake pad clearance
to the disc
1. Turn the cable barrel adjuster.
To increase the pad clearance,
turn the barrel adjuster
in (clockwise). To reduce
the pad clearance, turn the
barrel adjuster out (counter-
clockwise).
2. If the pads cannot be adjusted
properly in this manner, loosen
the cable clamp bolt and re-
attach the cable. Tighten the
cable clamp bolt to 50-70 lb•in
(5.7-7.9 Nm).
3. After adjustment, turn the
locking nut clockwise to help
prevent rotation of the barrel
adjuster.
To align the brake with the disc
1. Loosen the brake mounting
bolts.
Chapter : Adjustment
2. Slide a business card, or
similar thin object, between the
right brake pad and the disc.
3. Apply the lever fully, and
gradually tighten the bolts to
100-110 lb•in (11.3-12.4 N•m).

1. Remove the wheel.
2. With your fingers or thin-
tipped pliers, grasp the installa-
tion tang of the brake pad and
pull out.

For most road calipers, lift the
brake release lever to the open
UP position. To close, simply
turn the lever to the Down
position.
For Campagnolo levers, there is a
release button at the top of the
lever. Slightly depress the brake
lever, and push the button until
it is flush with the lever body.
Release the lever and the brake
will open.
To close, reverse the instruc-
tions.
For cantilever brakes, release the
linkwire. With one hand, squeeze
the brake pads firmly against the
rim. With the other hand, pull the
leaded end of the linkwire from
the retaining fork on the brake
arm. Release the brake pads, and
the brake will open.
To close the brake, reverse the
instructions.
Figure - Disc brake
A- Mounting bolts
B- Fixed pad adjuster
C- Cable clamp bolt
C
A
B
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek 07-TK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek 07-TK in the language / languages: English as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info