Manual Trebs PastaGusto Model 21126 (page 14 of 47) (English, German, Dutch, French, Swedish)

618948

Zoom out

Zoom in

1/47

Too wet; add some flour too dry; add some water correct!

TROUBLESHOOTING

• If the pasta is extruded more slowly, in spite of there being a sufficient amount of dough in the mixing

container, it may be that the dough has hardened around the opening of the closing slide. In such

case, push the slide into the mixing position and pull it back again.

• While making the pasta, you may have to switch off the appliance and remove the hardened dough

out of the stirring mechanism and the corners of the mixing container before you can start the

appliance again.

• If the appliance makes tapping sounds or if you think that the motor sounds as if it is overloaded,

switch off the appliance and close the closing slide. Then remove the locking washer, the pasta

attachment and the dough from the extrusion chamber. Add a little liquid, allow the dough to be

kneaded for a few minutes and again commence preparing pasta.

• Excessively dry dough may generate such high pressure that the motor may fail and the appliance will

suffer heavy damage and come to a stop. Your pasta machine is equipped with an anti-slip coupling

that will protect the motor. In such case, you will hear a loud ‘plopping’ sound, and you will hear the

motor run more slowly. For this reason, you should always ensure that the dough is wet enough.

• Please note: If excessively dry flour finds its way into the extrusion chamber, you should immediately

place the closing slide in the mixing position by pushing it sufficiently inward. You should thereafter

remove all the hardened flour from the locking washer, pasta attachment, dough transport coil and

extrusion chamber. After reassembling the equipment, you may continue making pasta.

CLEANING INSTRUCTIONS

1. Disconnect the appliance from the mains network by pulling out the plug.

2. Remove the sealing washer (11) and the pasta-shaping attachment.

3. Remove all the remaining dough from the extrusion chamber (9) and pull out the dough transport coil

(10).

4. Remove the dough from the pasta-shaping attachment using the cleaning attachment or with a

toothpick.

Attention: First allow the dough to dry before removing it. The work will be easier if you place the

attachment in the deep freezer to freeze the remaining dough before you start removing the dough.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trebs PastaGusto Model 21126 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trebs PastaGusto Model 21126 Manual

Product: