618948
13
Zoom out
Zoom in
Previous page
1/47
Next page
three projections of the extrusion chamber fit into the three grooves of the pasta-shaping attachment.
9. Hold the pasta-shaping attachment in place with a finger and push the sealing washer (11) over the
screw of the extrusion chamber (9) with simultaneous rotation in the clockwise direction. Only tighten
the sealing washer by hand. For this, use the ring spanner, otherwise there is a risk of stripping the
thread of the screw.
10. Now place the cover (5) on the mixing container (8). The installation is now complete.
PREPARATION OF PASTA
BASIC PASTA RECIPE (WITH EGGS)
Ingrediënt:
- 500 gr flour type “45” (available in all supermarkets, regular flour)
- 3 Jumbo size eggs (225 gr in egg-shell, check carefully)
- 1 tablespoon salt
- 40 ml water
- Measure exactly with a scoop; NB 1 tl=5ml
NOTE: If you use other flour, the amount of liquid (eggs, oil, water) can be different. Under recipes
you will find some recipes with different types of flour.
Preparation:
1. Select the pasta-shaping attachment for the desired type of pasta.
2. Place the pasta-shaping attachment in a bowl with hot water and a few drops of Oil. Ensure that the
attachment is covered with water. Allow it to lie immersed for 1-2 minutes.
3. Check whether the closing slide is fully pushed into the appliance (mixing position).
4. Now place the pasta-shaping attachment as described in the installation instructions in point 8 and 9.
5. Add the required quantity of flour and close the lid.
6. Switch on the machine and add the eggs in the machine.
7. Add salt and water.
8. Run the motor for around 4-5 minutes. The dough may be said to be suitable if it consists of pea-
sized lumps.
9. As soon as the dough is suitable, pull out the closing slide slowly out of the appliance until you hear it
click.
10. After 1 minute the pasta will come out of the machine.
11. Continue with the preparation of the pasta and always cut it to the desired length directly at the
outlet of the pasta-shaping attachment.
12. Within 10 minutes you will have 500 gr. Fresh pasta.
13. You can cook the pasta immediately (it doesn’t need to dry).
ATTENTION:
If you hear a loud sound indicating ‘overload’, immediately switch off the appliance and look up the
‘Troubleshooting’ section of this manual.
The product have a security function. If you open the lid the machine will switch off automatic.
In below pictures you can see the right consistency of the dough.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trebs PastaGusto Model 21126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trebs PastaGusto Model 21126 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info