671128
9
Zoom out
Zoom in
Previous page
1/30
Next page
Safety and Instruction Manual
9
Helpline: +44 (0) 333 220 6066
Pre-set
The Pre-set setting allows you to pre-set your
Pressure Cooker to delay the start time of a
function. Once you have selected your cooking
function press the pre-set button and select the
time in hours or minutes by pressing the Hour
and Minute buttons. For example if you want
the cooking function to begin in 2½ hours, use
the HOURS and MINUTES buttons to select 2½
hours and then press Start.
Once the delay time has completed, the warm
up process will begin and then your selected
cooking function will commence.
CookingTime
To adjust the cooking time for a function,
repeatedly press the menu button on the
control panel until you have selected the desired
function. This will display the cooking time for
that function. If you wish to increase or decrease
your cooking time for the required function, you
can do this by pressing the Hours and Minutes
buttons, this will then increase or decrease your
cooking time in minutes.
AddingIngredientsduringCooking
1. To add ingredients to the Pressure Cooker
during cooking you must rst de-pressurise
the cooker by turning the steam release
valve
2. Open the lid to the Pressure Cooker and
add your extra ingredients.
3. To replace the lid pull out the safety lock
override pin to disable the pressure lock.
Once the lid is securely in position the
safety lock override pin will spring back into
place.
4. Select you cooking function once again and
adjust to the remaining time.
GettingStarted
CookingRice
1. Measure out your required amount of rice
using the measuring cups provided, then
wash your rice under cold water.
2. Place washed rice into the cooking pot and
place the required amount of water into the
cooking pot, following the measuring guide
inside the cooking pot.
3. Place the lid on the unit and turn it clockwise
to close. Ensure your steam release valve is
in the closed position, with the circle facing
the arrow.
4. Now press your menu button and select the
Rice function, amend your cooking time if
required and press start.
5. The cooking function will start once the
Pressure Cooker has reached the correct
temperature.
6. Once the rice function has nished the Keep
Warm function will automatically start. You
can press cancel at any time to stop this and
go to standby mode.
7. Turn the steam valve to release steam. Once
the Pressure Cooker has de-pressurised, you
can open the lid.
8. You can now turn the lid anticlockwise to
open. The rice is now ready to serve.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

tower-t16005

Reset search

  • Part number for sealing ring of T16005 digital electric pressure cooker Submitted on 18-6-2022 at 14:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tower T16005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tower T16005 in the language / languages: English as an attachment in your email.

The manual is 3,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info