807535
62
Zoom out
Zoom in
Previous page
1/92
Next page
62
DE EN
First determine and plan the installation positions of all components.
Measure the required length of the TorqLink-Backbone.
Measure the lengths of all required stub lines (cable connection between
component and TorqLink-Backbone).
When planning, please note that TorqLink stub lines must not be extended.
If necessary, plan the TorqLink-Backbone so that the components can be
connected through the TorqLink stub line without an extension. If necessary,
extend the TorqLink-Backbone to connect a component that is far away; you
can nd corresponding extensions in our accessories catalogue.
Cables must be xed every 400 mm, plan attachment material. In places
where fastening is not possible, a scuff guard must be tted.
Openly laid cables must be protected with chang protection, plan suf-
cient material.
When planning, please note not to bundle power cables with data or anten-
na cables (e.g. radios) for other loads.
Observe the minimum bending radii of the cables when planning.
If a second earthed onboard power system is available, ensure that both
systems use a common earthing point.
Live parts must be tted or installed with protection against accidental
contact; the necessary installation space must be taken into account during
the planning stage.
6.3 Tools, equipment and material
Tool Used for
Spanner SW13 or socket wrench
SW13
Battery cable to battery terminals
Socket wrench SW17
Hexagon socket 3mm
Anode replacement
Spanner SW17 or socket wrench
SW17
Propeller assembly
Spanner SW17 Motor to hull attachment
Hexagon socket 6mm Attaching the clamp to the mounting
ange.
Hexagon socket 4mm Attaching the locking ring to the shaft
tube
Torque key Fastening screws and nuts
Suitable sealant Sealing the hull openings
Lubricant, if necessary salt water
resistant for salt water use
Installing the motor in the mounting
ange
Cable ties in various sizes Cable routing and mounting
M5 mounting screws, length as
required
Installing the battery main switch
M5 mounting screws, length as
required
Installing the charger unit
M6 mounting screws, length as
required
Installing the fast charger
M6 mounting screws, length as
required
Installing the accelerator lever
Attachment material Attaching the power cable and data
cable
Abrasion protection Installing/routing power cables
Earthing cable 25 mm² cross-section Installing the earthing cable
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 3.0 FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 3.0 FP in the language / languages: English, German as an attachment in your email.

The manual is 2.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 3.0 FP

Torqeedo Cruise 3.0 FP User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 3.0 FP User Manual - French, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info