807535
61
Zoom out
Zoom in
Previous page
1/92
Next page
61
DE EN
Torqeedo batteries are specially designed for installation and use in marine appli-
cations.
Keep the following points in mind when planning:
Batteries must be able to be xed mechanically.
It must be possible to install the ventilation adapter in closed storage
rooms or cabins (Power 48-5000 only).
Select a location that corresponds to the IP protection class of the battery;
information on this can be found in the respective operating manual.
Make sure that the intended installation location offers sufcient space for
the wiring.
Charger units
NOTE! To charge the batteries in the boat, a land connection in the boat with
galvanic isolator is required according to applicable national requirements (e.g.
DIN EN ISO 13297, ABYC E-11).
Keep the following points in mind when planning:
Torqeedo recommends using one charger unit per battery.
Choose a place in the boat where there is no stagnant air to ensure cooling
of the charger unit.
Select a location that corresponds to the IP protection class of the charger
unit; information on this can be found in the respective charger unit operat-
ing manual.
Make sure that the intended installation location offers sufcient space for
the wiring.
Accelerator lever
If you use a Cruise R, you need an accelerator lever to control the motor.
Keep the following points in mind when planning:
The accelerator lever must be easily accessible and operable from the
control position.
The display must be easy to read from the control position.
The accelerator lever must have enough space to be operated without
restriction.
Emergency kill switch, kill switch, drive enable, on/off switch
Depending on the conguration of your Torqeedo system, you can install differ-
ent components.
Keep the following points in mind when planning:
Kill switches must be installed near the steering position, this is the only
way the driver can be connected to the kill switch with the rip cord.
Emergency kill switches must be installed in such a way that they are easily
accessible at all times.
Plan the installation location of the emergency kill switch so that it cannot
be triggered accidentally (e.g.in downward gradients)
Plan the installation location of the on/off switch so that there is no danger
of injury (e.g. by getting caught on the key switch)
Plan the installation location of the switches so that they cannot be acci-
dently actuated.
6.2.2 External loads
Torqeedo recommends that loads that do not affect the Torqeedo system, such as
radios, lighting, etc., should be operated via a separate onboard power supply.
When using external batteries, the energy consumption of auxiliary loads s not
taken into account when calculating the range.
When using auxiliary loads, the additional power consumption must be taken
into account and the battery bank must be designed according to the total power
consumption.
6.2.3 Wiring
The wiring of your Torqeedo system depends on the components installed. You
can nd the connection diagram for your system in the Service Center section of
our website: www.torqeedo.com
Keep the following points in mind when planning:
An earthing point is required for your Torqeedo system. Take into account
the connection and the cables required for this in your planning. The
required cable cross-sections can be found in the section Tools, equipment
and material.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Torqeedo Cruise 3.0 FP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Torqeedo Cruise 3.0 FP in the language / languages: English, German as an attachment in your email.

The manual is 2.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Torqeedo Cruise 3.0 FP

Torqeedo Cruise 3.0 FP User Manual - Dutch, Danish - 92 pages

Torqeedo Cruise 3.0 FP User Manual - French, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info