Manual Titan TTK587GDO (page 51 of 58) (English)

672452

Zoom out

Zoom in

1/58

10. Put it together with the spring washer (D4) and cover (D2),and tighten locking nut (D3)

with the socket wrench (E6) clockwise . (See Fig. 34h, 34i)

NOTE: The saw chain (D6) has not yet been tensioned. Tension the chain as

described under “Saw chain tensioning”. After operating the product for approx.

30min, adjust the chain

Guide Bar

Most guide bar problems can be prevented merely by keeping the product well maintained.

Incorrect filling and non-standard cutter and depth gauge settings are the causes of most

guide bar problems, primarily resulting in uneven bar wear. As the bar wears unevenly, the

rails widen, which may cause the chain to clatter and make it difficult to complete straight

cuts. If the guide bar is insufficiently lubricated and the product is operated with a saw chain

which is too tight, this will contribute to rapid bar wear. To help minimise bar wear,

maintenance of the guide bar as well as the saw chain is recommended.

1. Disassemble the guide bar and saw chain in reversed order from assembly.

2. Check the oiling port (D14) for clogging and clean if necessary to ensure proper

lubrication of the guide bar and saw chain during operation. Use a soft wire small enough

to insert into the oil discharge hole. (See Fig. 36a)

Fig. 35h

Fig. 35i

Fig. 36a

NOTE: The condition of the oil passages can be easily checked. If the passages are clear,

the chain will automatically give off a spray of oil within seconds of the product

starting. Your product is equipped with an automatic oiling system.

3. Check the drive sprocket (D10). If it is worn or damaged due to strain, have it replaced by

an authorised service agent.

4. Clear residue from the rails on the guide bar (D7) using a screwdriver, putty knife, wire

brush or other similar tool. This will keep the oil passages open to provide proper

lubrication to the guide bar (D7) and saw chain (D6). (See Fig. 36b)

25CC PETROL MULTI TOOL TTK587GDO

WE BOUGHT A 587GDO and have not got a bolt/nut with the trimmer - do you know if the model has been modified since 2017 or can the nut be purchased ?
Thanks Submitted on 27-7-2023 at 17:57
Reply Report abuse
This product is not fit for purpose
Why it’s there a clear instruction to extent the strummer line and head removal Submitted on 17-5-2022 at 15:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Titan TTK587GDO in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Titan TTK587GDO Manual

Product: