Manual Titan TTK587GDO (page 50 of 58) (English)

672452

Zoom out

Zoom in

1/58

5. Take off the guide bar and chain. (Fig.35d)

6. Ensure that the tension pin (D11) is adjusted to its far right position before assembly the

checked or the new chain and guide bar. If not, turn the tension screw (D12) anticlockwise

with the slotted screwdriver (E6). (See Fig. 35e)

7. Spread the saw chain (D6) around the guide bar (D7). Slide the chain into the groove

around the guide bar. Pay attention to the cutting direction.

8. Align the saw chain around the drive sprocket (D10) and place one corner of the guide bar

into a gap of the sprocket. (See Fig. 35f)

Fig. 35d

Fig. 35e

WARNING! The direction of the saw chain 'cutters' must be as indicated by the arrow

on the pruner head!

Fig. 35f

9. Make sure the tension pin (D11) is inserted into the lower hole on the guide bar. (See Fig. 35g)

Fig. 35g

25CC PETROL MULTI TOOL TTK587GDO

WE BOUGHT A 587GDO and have not got a bolt/nut with the trimmer - do you know if the model has been modified since 2017 or can the nut be purchased ?
Thanks Submitted on 27-7-2023 at 17:57
Reply Report abuse
This product is not fit for purpose
Why it’s there a clear instruction to extent the strummer line and head removal Submitted on 17-5-2022 at 15:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Titan TTK587GDO in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Titan TTK587GDO Manual

Product: