672452
49
Zoom out
Zoom in
Previous page
1/58
Next page
49
25CC PETROL MULTI TOOL TTK587GDO
WARNING! After changing the trimming line, run the product under no load for at
least a minute to make sure that the line and the product are operating correctly!
WARNING! Never use steel thread! Always use cutting means in perfect condition,
free of damage!
Blade (Hedge Trimmer)
1. Keep the hedging blade (C1) clean and free of debris. Remove trimmings.
2. Keep the hedging blade (C1) sharp to retain a good cutting performance. Replace a worn
or damaged cutting blade with a new one of the same type.
3. Lubricate the hedging blade (C1) after each use to prolong the life span of cutting blade
and product. Apply light machine oil along the edge of the cutting blade.
Guide Bar and Saw Chain Maintenance
Replace chain and guide bar
1. Use only the guide bar (D7) and saw chain (D6) according to the technical data of the
product.
WARNING! Always use a saw chain designed as “low-kickback” or a saw chain
which meets the low-kickback requirements! A standard saw chain (a chain which
does not have the kickback reducing guard links) should only be used by an
experienced professional operator! Nevertheless, a low-kickback saw chain does
not completely eliminated kickback! A low-kickback or “safety” chain should never be
regarded as complete protection against injury!
2. Place the product on a suitable flat surface with the cover (D2) facing upwards.
3. Loosen locking nut (D3) with the socket wrench (E6) anticlockwise and remove it
together with the spring washer (D4) and cover (D2). (See Fig. 35a, 35b)
Fig. 35a
Fig. 35b
4. Turn the tension screw (D12) clockwise with the slotted screwdriver (E6).and make sure
the tension pin(D11) is adjusted to its closer position. (See Fig. 35c)
Fig. 35c
49


Need help? Post your question in this forum.

Forumrules
1

Forum

titan-ttk587gdo

Reset search

  • WE BOUGHT A 587GDO and have not got a bolt/nut with the trimmer - do you know if the model has been modified since 2017 or can the nut be purchased ?
    Thanks Submitted on 27-7-2023 at 17:57

    Reply Report abuse
  • This product is not fit for purpose
    Why it’s there a clear instruction to extent the strummer line and head removal Submitted on 17-5-2022 at 15:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Titan TTK587GDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Titan TTK587GDO in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info