672452

Titan TTK587GDO Manual

52
Zoom out
Zoom in
Previous page
1/58
Next page
Fig. 36b
5. Check the guide bar 'rail' for wear: Hold a ruler (straight edge) against the side of the
guide bar and 'cutter side plates'. If there is a gap between the ruler and guide bar the
guide bar 'rail' is normal. If there is no gap (ruler flush against the side of the guide bar)
the guide bar 'rail' is worn and needs to be replaced with a new one of the same type.
(See Fig. 36c)
Fig. 36c
6. Turn the guide bar 180° to allow even wear, thereby extending the life span of the guide
bar (D7).
7. Check the saw chain for possible wear and damages. Replace it with a new one if
required. Experienced user can sharpen a dull saw chain (see section “Saw chain
sharpening” below).
8. Refit the saw chain (D6) and the guide bar (D7) as described under “Assembly”.
SAW CHAIN SHARPING
WARNING! Only sharpen the saw chain yourself if you are trained and have
experience! Use proper tools to sharpen the saw chain!
NOTE: Never saw with a blunt chain. The saw chain is blunt if you have to push the product
into the tree and the chips are very small.
1. Have the saw chain (D6) sharpened professionally at an authorised service centre or
sharpen the chain yourself by using a suitable sharpening kit. Also observe the
sharpening instructions supplied with the sharpening kit.
2. The height difference between the tooth and the ridge is the cutting depth. When
sharpening the saw chain (D6) you have to consider the following points. (See Fig. 37a)
- File angle
- Cutting angle
- File position
- Diameter of round file
- File depth
52
25CC PETROL MULTI TOOL TTK587GDO
… 52 …


Need help? Post your question in this forum.

Forumrules
1

Forum

titan-ttk587gdo

Reset search

  • WE BOUGHT A 587GDO and have not got a bolt/nut with the trimmer - do you know if the model has been modified since 2017 or can the nut be purchased ?
    Thanks Submitted on 27-7-2023 at 17:57

    Reply Report abuse

  • This product is not fit for purpose
    Why it’s there a clear instruction to extent the strummer line and head removal Submitted on 17-5-2022 at 15:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Titan TTK587GDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Titan TTK587GDO in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info