658790
25
Zoom out
Zoom in
Previous page
1/29
Next page
English
21
7.3 Software Update
Update the receiver via USB or OTA (download via satellite). If these updates are available, then they
will be executed by pressing OK.
7.3.1 USB Update
This function allows you to perform a software update with a USB storage device.
Download the software and update instructions from our website www.thomsonstb.net and unzip it
on your PC. Then load the le to the root directory of your correctly formatted USB storage device
and connect it to your receiver. Turn on the receiver and wait until the USB device is successfully
detected.
Press OK in the menu USB Update and conrm the displayed message, then wait until the software
updates and loading process begins. After the loading process has been started successfully (a
progress banner is displayed) you can disconnect the USB storage device (or wait until the update
is fully loaded)! Please disconnect the USB device after a successful update in order to restart the
receiver!
WARNING: NEVER disconnect the receiver from the mains or switch the power OFF
during the update procedure. It can damage your receiver and warranty
will be void! In case of an USB software update please consider that the
receiver may delete all channels, data and user settings in certain cases.
NOTE: The above mentioned USB functions require a correctly formatted USB
storage device to be connected to the receiver.
7.3.2 OTA Software Update
The OTA (Over the Air) function check automatically if software updates available on satellite. Please
ask your local dealer or visit our website www.thomsonstb.net for information.
If there is new software available via satellite, the receiver will show a message banner.
Follow all instructions that are displayed on screen. If an update is available choose Download with
pq and press OK to start the update process.
WARNING: After the update the receiver restarts automatically! During the update
process NEVER disconnect the receiver from the mains, switch power
OFF or disconnect the receiver from the antenna cable! This can damage
your receiver and warranty will be void! In case of an OTA update please
consider that the receiver in certain cases may delete all channels, data
and user settings.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Please check the receiver
according to the procedures shown below. If the receiver does not work properly after checking it,
please contact your local service line or THOMSON dealer. Alternatively, you can send a support mail
via our website: www.thomsonstb.net. NEVER open or disassemble your receiver. This may cause a
dangerous situation and will void the warranty.
Symptom Cause Remedy
The status LED on the
front panel does not
light up.
The power adapter
is not plugged in.
Check that the power adapter is plugged into the
wall outlet.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS815 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info