658790
23
Zoom out
Zoom in
Previous page
1/29
Next page
English
19
7.1.3 Storage Device Setup
This option shows relevant information about the connected USB device. In this menu you can also
format your USB storage device and safely remove.
Select Storage Device Setup in the Storage menu and press OK to enter.
All details as free and used space sizes and used le system are shown.
Press the Red Safely Remove button and press OK to safely disconnect the USB device. The receiver
will display a message indicating that you can now safely remove your storage device from the
receiver. Press the Blue Format USB Device button to format the connected USB device.
Please, enter your PIN code to access the menu and press OK to start formatting.
Press
to leave this menu.
NOTE: After performing the Safely Remove function, the USB device is no longer
accessible by your receiver. To gain access to your storage device again,
re-insert it or switch the receiver to standby and on-mode again.
WARNING: Formatting will permanently delete ALL data stored on the connected
device. Please make a backup copy of all data you wish to keep before
entering the Format menu. STRONG cannot be held responsible for loss
of data from USB devices used with this receiver.
NOTE: It is possible to use USB storage devices already formatted in NTFS.
7.2 Tools
In this menu you can nd information about the software and hardware version of your receiver. A
customer support agent might ask for the information given in this screen. Press to return to the
menu.
7.2.1 Receiver Information
This menu allows you to check information about your receiver model, software, serial number, users
ID and CSSN number.
7.2.2 Factory Default Reset
A factory default reset will restore your receiver to the factory default settings. It will delete all settings
and channels. To reset the receiver, you have to enter your PIN code (Default PIN: 0000), then use
pq to select OK to execute or Cancel to return to the menu. Afterwards the receiver will restart with
the First Time Installation.
WARNING: A factory reset will permanently delete all your personal settings, timers
and stored channels. Please consider this before you perform a factory
reset.
7.2.3 CA Information
This menu allows you to check information about your (CA) Conditional Access, Service Status,
Loader version, Mailbox, set up Maturity Rating and Update of software.
7.2.3.1 Smartcard Status
Your receiver is equipped with a smartcard slot which allows to access Irdeto encrypted services.
Depending on your smartcard, you can read different information which might also be consulted
from your broadcaster in order to give the most effective support. The programmes that can be
descrambled are determined by the smartcard, respectively the subscription which you use. This sub
menu gives you access to the advanced functions and information in respect to your Irdeto smartcard
if it is inserted.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS815 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info