658790
10
Zoom out
Zoom in
Previous page
1/29
Next page
6
WARNING: The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used, we recommend
using (e.g. NiMH) types with low self-discharge to ensure long time
operation of remote control.
2.7 Using the remote control
Obr. 5
To use the remote control, point it towards the front of the digital receiver. The remote control has a
range of up to5 metres from the receiver, if properly aligned towards the IR eye on the front panel.
NOTE: The remote control will not operate if its path is blocked or affected by
bright/stroboscopic light.
3.0 CONNECTIONS
3.1 Basic connection via HDMI or SCART
Obr. 6.
a) Connect the LNB or Monoblock for ASTRA 19.2 /ASTRA 23.5 of your satellite antenna to the
SAT IN connector of your receiver using a good quality coax cable and suitable ‘F-connector
plugs.
b) Connect one end of a good quality HDMI cable to the HDMI connector of your receiver and
the other end to the HDMI input of your TV set.
c) Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
Optional: If your TV set doesn’t have an HDMI connector you can use the SCART connection instead.
In such case connect one end of a good quality SCART cable to the TV SCART of your receiver and
the other end to the SCART input of your TV set.
3.2 Connecting to multiple xed antennas
Obr. 7.
a) Connect the LNBs of your xed antenna to the desired inputs of a DiSEqC 1.0 switch using a
good quality coaxial cable and suitable ‘F-connectors’.
b) Connect the output or “to receiver” output of the DiSEqC 1.0 switch to the SAT IN connector
on your receiver using a good quality coaxial cable and suitable ‘F-connectors’.
c) Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
3.3 Connecting to your motorised dish via DiSEqC 1.2 or GOTO-X
Obr. 8
Another possibility for watching programmes from multiple satellites is by mounting a dish to a
motorized DiSEqC 1.2 or GOTO-X positioner. For the correct setup and mounting of your motorised
dish we recommend referring to the advice of a professional satellite equipment installer to ensure
correct alignment and function. Please ensure that all connections are tting well and are correctly
assembled, then you only need to connect the “OUT” connector of your positioner to the SAT IN
connector on the rear side of your receiver.
3.4 Extended connections for your home entertainment
Obr. 9
a) Connect one end of a good quality coaxial audio cable to the S/PDIF output of your receiver
and the other end to the coaxial audio input of your home theatre set, amplier or any other
device supporting digital audio.
b) Connect your USB 2.0 storage device to this connector by using a good quality USB cable or
insert the device directly.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS815 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info