658790
12
Zoom out
Zoom in
Previous page
1/29
Next page
8
4.5 Satellite DiSEqC Selection (Step 5)
In the menu Welcome 5th Step: DiSEqC Select the receiver will do an automatic scan for connected
LNBs and suitable satellites. The most common satellites, such as Astra 23.5E, Astra 19.2E, Hot Bird
13.0E and Eutelsat 9.0E, will be scanned for availability. Please, wait for a short time to let the receiver
complete the scan and then apply the settings to the next step by pressing OK at Next. Press OK
at Back if you have forgotten to connect a satellite cable or need to correct anything else that was
adjusted before. Also it is possible to select or change connections manually by selecting a satellite
and change the port. Once the Auto DiSEqC Select is nished and you have conrmed with OK you
will automatically go to the next last Step 6 of the Installation Wizard.
4.6 Programme Search (Step 6)
After Step 5 the receiver will automatically load the channel list from the operator. Please be patient
as this takes some time. When the list has been successfully loaded, the installation is nished and the
rst channel starts to play. To watch and open scrambled channels from the operator, you need to
insert the smartcard in the slot on at the left side of the receiver with the golden chip facing down.
NOTE: To ensure reception and to scan the channels from your operator follow
the above Fast Scan method in these steps. The reception of Astra 23.5E is
essential.
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We understand that you can’t wait to enjoy your new HD receiver. We do, however, advice you to
read the full manual to get the best performance from your THOMSON HD receiver.
To switch your receiver on or to Standby, use the q button on the remote control or the button
on the left-hand side of the front panel. Please, insert your valid and activated Irdeto smartcard for
proper reception of the channel bouquet of your choice.
Choose a channel with pq or the CH+/CH- buttons. Alternatively, you can digit the channel number
with the 0~9 buttons on the remote control or press OK in viewing mode to display the channel list.
The volume can be adjusted with the V+/V- buttons. The usage of V+/V- and ! is possible in ALL
menus which a TV picture present in the background and can additionally be used in the videotext
mode. In viewing mode you can also use t u.
P+/P- enables you to scroll page wise in all list modes to make your channel selection or another
selection as comfortable as possible.
NOTE: After switching the receiver to standby it will enter to the Real Standby
deep sleep mode after3 minutes. Within this time, you can switch quickly
back to On. Starting up from this deep sleep takes approx. 1 min.
6.0 OPERATION
In viewing mode, several features are available to make watching TV a true entertainment. This
chapter describes these features. Please also read chapter 7.0 to get familiar with the menu of your
new receiver.
6.1 Changing channels
Your new receiver is equipped with three options to switch channels.
1. Via direct access
2. Via the channel list and
3. Via the CH+/CH- or P-/P+ keys.
6.1.1 Direct access
To gain direct access to a certain channel, simply enter its number with the 0~9 buttons on the
remote control. Channel numbers can be up to four digits long. Entering a number with less than four
digits is possible. After entering the channel number, wait a few seconds and your receiver will switch
to the selected channel.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS815 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS815 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info