Manual Thomson THS811 (page 17 of 30) (English)

658793

Zoom out

Zoom in

1/30

MAIN MENU

P13

English

LNB Power Here you can change the LNB power with tu if necessary.

Transponder Press OK to open the list of available transponders for the chosen satellite, in

order to check your reception or align the antenna.

Press the RED button SAT Edit to rename the chosen satellite and press the GREEN button Add TP to add a

new transponder to this satellites database.

7.1.1.1 SAT Edit

This submenu allows renaming of the chosen satellite and changing of its orbital position. Use pq to

choose Satellite or Position.

Satellite: Press OK to open the keyboard and enter a new name with the 0 ~ 9 buttons

(max. 9 signs). When you have entered the preferred name, press pq to choose

OK in order to rename or choose Cancel to discard.

Position: Use 0 ~ 9 to enter the orbital position. If necessary, you can use OK and pq to

change the hemisphere from E to W or vice versa.

By pressing the pq buttons you can select OK to change or Cancel to discard.

7.1.1.2 New TP

This submenu allows adding one or more transponders to the database of the selected satellite. This

enables you to check the signal or adjust the antenna for this satellite. Further you can perform a NIT

Search on the new satellite when you have added the appropriate transponder. The full editing functions

are available in the Channel Search menu. Here use the pq buttons to navigate.

Frequency: Enter a frequency with the 0 ~ 9 buttons.

Symbol rate: Enter the required symbol rate with the 0 ~ 9 buttons.

Polarization: Here the polarization can be changed with tu.

By pressing the pq buttons you can select OK to change or Cancel to discard.

After all settings are adjusted according to your system requirements, press

to leave this menu. A

message will inform about the changes, use the pq buttons to select Yes to save or No to discard and

confirm with OK. The receiver will return to the selection screen and you can continue.

If you want to delete a satellite press the GREEN button. If you want to delete all satellites that have been

setup press the YELLOW button to do so. When all settings have been made, press to leave this menu.

7.1.2 Channel Search

Use this menu to perform an automatic, network or transponder channel search or to search on all

satellites that have been setup. Use pq to highlight an item and tu to change settings. Below the

settings you can find the search method selection.

Antenna Here you can change the antenna port with tu if you have configured more

than one satellite.

Satellite Here you will see the satellite that is assigned to the antenna in above, you can

only see the satellite(s) which has/have been setup in the Antenna Setup menu

before.

Transponder list By pressing tu you can change between the transponders referring to the

selected satellite, you can also press OK to list up and select with pq or P+/P.

Afterwards press OK to choose. Press RED to Edit TP, with GREEN you can Delete

TP and with BLUE you can enter data for a new transponder Add TP.

For the further procedure in Edit TP and Add TP see chapter 7.1.1.2 Add TP. In Delete TP a message will be

displayed to apply your changes, use pq to select Yes to apply or No to cancel and confirm with OK.

Scan Mode Here you can decide which channels you want to scan for: Either scan all channels

FTA & $, for Free-To Air only FTA or use CA to scan for scrambled channels only.

Channel Type TV & Radio will scan for TV and radio channels, TV for TV channels only and Radio

for radio channels only.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS811 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS811

Thomson THS811 User Manual - German - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson THS811 Manual

Product: