658793
16
Zoom out
Zoom in
Previous page
1/30
Next page
P12
MAIN MENU
NOTE: Timeshift only works correctly when a fast USB storage device such as a USB2.0 HDD is
connected to the receiver. Distorted picture and/or audio during Timeshift indicate a too
slow USB device speed. THOMSON cannot guarantee for USB devices used. Especially when
Timeshift is activated at channels with high data rate (High quality SD/HD), THOMSON
cannot guarantee an accurate playback of the Timeshift file.
WARNING: The broadcasting rights of encrypted channels may be limited by the provider and fast
forward/rewind may not be possible or the Timeshift function may be limited.
6.10 Playback of recording
If you have made recordings you can access the HDD Manager directly from viewing mode by pressing u.
Select the recorded event with pq and start the playback in full sceen mode with OK. Alternatively you
can press 1 to start playback in preview mode. Further options are displayed in the HDD Manager. For a
detailed description of the menu please refer to chapter 7.4.4 HDD Manager.
WARNING: For encrypted channels broadcasting rights may be limited by the seller, which is why some
channels are restricted during playback to fast forward/rewind, or possibly limited in another
way. When the Maturity Rating is activated for a certain programme, you must enter the
corresponding PIN code MATURITY RATING MASTER PIN: 0000 to be able to record this
programme.
7.0 MAIN MENU
Press MENU in viewing mode to display the Main Menu. All important settings and features of your
receiver can be operated from the Main Menu. It consists of the following sub-menus: Installation, Update &
Info, Conditional Access, Channel Manager and Timer.
Use tu to select a sub-menu and pq to choose an option. Press OK to advance to the chosen
submenu.
7.1 Installation
This menu allows you to change satellite settings and to search for channels. Further you can adjust
important settings for your receiver. It consists of the following sub-menus: Antenna Setup, Channel Search,
System Settings, Parental Lock and Factory Reset. Choose a sub menu with pq and press OK to advance.
7.1.1 Antenna Setup
Use this menu to change or add the settings for an already installed or new satellite and to configure its
parameters. In the Type line you can adjust if you’re using a DiSEqC switch or not by using tu to change.
If your setup differs you can adjust DiSEqC OFF or use the default setting DiSEqC 1.0.
If you use DiSEqC OFF you will only be able to setup one satellite. Press q and then OK to open the
settings for this connection.
For the usage with DiSEqC 1.0 you can enter the same parameters for up to 4 satellite positions.
Edit LNB
Satellite Press OK to open the list of available satellites and chose the preferred satellite
with pq or P+/P and confirm by pressing OK.
LNB Type Choose LNB Type with tu if you are not using a universal LNB.
LNB Low Freq. This shows the value for the appropriate LNB Type used and you can only adjust
for “Normal” LNB.
LNB High Freq. This shows the value for the appropriate LNB Type used and you can only adjust
for “Normal” LNB.
22KHz Tone This setting for AUTO should not be changed, only if is necessary for your LNB
type.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS811 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS811 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS811

Thomson THS811 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info