Manual Thomson ROC 4505 (page 9 of 102) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

607819

Zoom out

Zoom in

1/102

5. If the problem persists and always with the same

key, check that the original remote control is

actually operating: is it sending IR signals? (check

batteries;is it correctly aligned in relation to the

diode on your ROC 4505?

Note 2:

•You cannot copy keys to the LEARN, BACKLIGHT,

SETUP, MACRO, FAV, HOME CINEMA keys.

•All the keys copied to a mode will be deleted if a 4

figure code is entered for this mode (and likewise for

direct entry of a code,search of a code or make).

Ide

ntifyi

the

pos

itio

the diode

on the original remote control (keys

to copy)

If the LED of the original remote control is not

visible (for example,if hidden behind a dark plas-

tic plate), the instructions below will help you to

locate it precisely.

1. Place the front of the original remote control

(the part you point at the device to control)

around 2.5 cm from the LED of your ROC

4505 opposite

LEARN (see LEARNING dia-

gram at beginning of instructions).

2. Hold down the SETUP key until the key cor-

responding to the last selected moderemains

lit.

3. Release the

SETUP key.

4. Press once on amode key (TV,DVD,VCR,…).

The key goes out and then relights.

5. Press once on the

LEARN key.

6. Hold down one of the keys on the original

remote control while moving the remote

control from left to right. As soon as the 2

remote controls are correctly aligned, the

mode key blinks rapidly.

7. To copy the key functions from your original

remote control into your ROC 4505,go to

step 5 of “To copy keys”.

Note: Someoriginalremote controls don’t transmit conti-

nuous IR signals when a key is held down.If this is the

case,press severaltimes on one of the keys while moving

the remote control from left to right.

To copy keys

1. Hold down the SETUP key until the key cor-

responding to the last selected moderemains

lit.

2. Release the SETUP key.

3. Press once on the mode key (TV, DVD, VCR,

…).The key goes out then relights.

4. Press the LEARN key once.

5. Press once on the key of your ROC 4505

to which you want to copy one of the keys of

your original remote control.

6. Hold down the key of the original remote

control you wish to copy until the mode key

goes out and then relights (2 to 3 seconds).

In case of problems, the mode key will blink

for 3 seconds but will remain in learning

mode.Try again or try another key.

7. For the other keys, repeat the procedure

from step 5 onwards.

Press the

SETUP key once when all the desired

keys have been copied.The mode key goes out.

To delete all keys copied under a

mode

1. Hold down the SETUP key until the key cor-

responding to the last selected moderemains

lit

2. Release the

SETUP key.

3. Press once on amode key (TV,DVD,VCR,…).

The key goes out then relights.

4. Press twice on the LEARN.key.The key goes

out then relights.

5. Press once on the SETUP key. The mode key

goes out.All the keys copied under this mode

are deleted.

The HOME CINEMA key

The Home Cinema mode is a mode in which cer-

tain keys of the remote control are dedicated to

those devices that you select.This becomes pos-

sible after allocating a mode key (

TV, DVD,…) to

a group of keys previously dedicated to this

mode.For example,the play keys (8) can be allo-

cated to a video cassette recorder,aDVD player,

a cassette player, hifi system,etc.It is up to you to

choose which device you will allocate to this

group of keys.You need to do the same for the

other groups of keys.

The groups of keys are:

Allthe keys except the PROG,VOL and keys,as

wellastheplay keys (8) plus thenavigation keys (5).

•the PROG

key

•the VOL and keys (4)

•play keys

•the navigation keys

, MENU,

EXIT, OK.

How to program the HOME CINEMA

key?

1. Hold down the SETUP key until the key cor-

responding to the last selected moderemains

lit.

2. Release the

SETUP key.

3. Press once on the HOME CINEMA key. The

mode key goes out then relights.

4. Select the device allocated to the number

keys (1 to 9).

Press once on a numbered key then once on a

mode key (

TV, DVD, VCR,…).The key goes out

then relights.

5. Select the device allocated to the

PROG key

(channel changes).

Press once on the PROG key then once on a

mode key (TV, DVD, VCR,…).The key goes out

then relights.

6. Select the device allocated to the VOL and

keys.

Press once on the VOL or (4) keys then once

on the mode key (TV, DVD, VCR,…).The key goes

out then relights.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson ROC 4505 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson ROC 4505 Manual

Product: