607819

Thomson ROC 4505 Manual

10
Zoom out
Zoom in
Previous page
1/102
Next page
7. Select the device allocated to the play keys
.
Press once on one of these keys (8) then once on
the mode key (TV,
DVD,VCR,…).The key goes out
then relights.
8. Select the device allocated to the navigation
keys ,
MENU,EXIT,OK.
Press once on one of the navigation keys (5) then
once on a mode key (
TV, DVD, VCR,…).The key
goes out then relights.
9. End of the programming
Press once on the HOME CINEMA key.The mode
key goes out. The programming of the HOME
CINEMA key is finished.
How to delete the programming of
the HOME CINEMA key?
1. Hold down the SETUP key until the key cor-
responding tothe lastselected moderemains
lit.
2. Release the SETUP key.
3. Press once on the HOME CINEMA key. The
key goes out then relights.
4. Press once on the SETUP key. The HOME
CINEMA key has now been deprogrammed.
Notes:
•During the programming of the HOME CINEMA,key,
any action on the
FAV, MACRO keys,or mode keys
(TV,DVD,…)halts the procedure.
•The default input mode isTV mode.
•The group keys can be programmed in any order.
•The remote control remains in programming mode
as long as the
HOME CINEMA key is not pressed
again.
•The
HOME CINEMA key cannot be included in a
Macro or selected as favourite (FAV).
The FAV key (9)
This key allows you to memorise two of your
favourite channels.Access to one or the other
channel is toggled by pressing the
FAV key.
How to program the FAV key?
1Hold down the SETUP key until the key cor-
responding tothe lastselected moderemains
lit.
2. Release the SETUP key.
3. Press once on the
FAV key.The key goes out
then relights.
4. Pressamodekey(TV,VCR,…)then enter the
number of your first favourite channel.The
key goes out then relights.
5. Press once on the FAV key.The key goes out
then relights.
6. Press a mode key (TV, VCR,…) then enter
thenumber ofyoursecondfavouritechannel.
The key goes out then relights.
7. Press once on the FAV key.The key goes out.
The PIP key
This key operates like this key on your original
remote control.
Other functions
Placing all devices on standby
Press the key twice in less than one second,
keeping it held down the second time.All the
devices go on standby one after the other.
Adjustment of ALL volume controls
under a specific mode
You can allocate the volume control to one of the
modesof the remote controlon condition thatthe
volume controlexists on the corresponding device
(e.g.control ofTV sound inTV mode,orVCR,…).
1. Hold down the
SETUP key until the key cor-
responding tothe lastselected mode remainslit.
2. Release the SETUP key.
3. Press the key until the mode key blinks
once.
4. Press once on the mode key (TV, VCR,…)
corresponding to the device whose volume
will always be controlled by the
VOL and
keys.
5. Press the
key once.
Adjustment of the volume controls
for EACH mode.
You can decide that the volume control is func-
tional for each mode selected on condition that
the volume control exists on the corresponding
device (e.g.control of the television set sound in
TV mode,the control of the sound of the SAT
receiver in SAT mode,…).
1. Hold down the
SETUP key until the key cor-
responding tothe lastselected mode remainslit.
2. Release the SETUP key.
3. Press the key until the mode key blinks
once.
4. Pressonceonthemodekey(TV,VCR,…) cor-
responding to the device whose volume will
always be controlledby the
VOL and keys.
5. Press the VOL
key once.
6. Press the
key once.
The NAVILIGHT system
The THOMSON NAVILIGHT system allows
you easy access to the settings of your television
(TV) or video recorder (VCR) including this fea-
ture.
1. Switch on the set you want to control.
2. Press the key corresponding to the type of
set you want to use (TV,
VCR,or SAT).In the
VCR position,make surethat theAV mode is
activated for theTV set (the SCART socket
must be selected).
3. Press key
MENU once.
4. Navigate through the setting menus with the
play keys
.
5. Validate with OK.
6. To leave the menus,press key EXIT once.
6
ROC 4505 / EN - bj - PB / epheme - rst / 11-2006
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson ROC 4505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson ROC 4505 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info