Manual Thermocet N21- INTIMO TWO TONE (page 17 of 28) (English)

607250

Zoom out

Zoom in

1/28

Page 17

• 90-degree bends have a nominal length of 2 metres.

• 45-degree bends have a nominal length of 1 metre.

• Assembly direction is very important.

• The outlet can be made anywhere in the roof surface or exterior wall (inlet and discharge in iden-

tical pressure areas), but must comply with the regulatio ns currently in force.

The concentric duct system consists of the following components: ( see page 25 )

A. Concentric pipe. 25-50-100 cm J. Adjustable roof plate

B. Concentric 45° bend. K. Flat roof flashing aluminium

C. Wall bracket. L. Storm collar / rosette

E. Concentric 90° bend. M. Horizontal terminal eccentric

F. Wall band adjustable. N. Lead slope roof flashing 20°- 45°

G. Adjustable length = 250 mm O. Vertical terminal

H. Wall cover plate. P. Slope roof flashing 5°- 30°

I. Locking band

Connection to concentric duct system

Note:

In combination with London surround;

Direct wall outlet - start with 1x 90° bend

Vertical outlet - start with 2x 45° bend

Direct external wall duct plus use 90° bend (see illustration 7, page 24).

Decide on the position of the appliance and connect up the wall duct set. The wall duct set will have to

be shortened if the appliance is being installed directly against the wall (cavity wall for example).

(Y=0.725 metres max.)

Exterior wall duct without bends (see illustration 8, page 24)

Always place a length of X=1 metre vertically on the appliance, directly followed by a 90-degree bend

and the standard length exterior wall duct set, Y=0.6 metres.

Exterior wall duct with horizontal bend (see illustration 9, page 24).

Always place a length of X=1 metre vertically on the appliance and the course can be continued with

one 90-degree bend (nominal length per bend is 2 metres). A maximum horizontal deviation of Y=4

metres can then be made. Ensure there is adequate slope and take the horizontal length of the bend

itself into account.

Note: In some situations the flue pipe should possible be placed close to the wall. Thus the 90° bend

can not make the shortest radius; to overcome this the hole in the wall for the 90° bend can be made

lightly oval shaped.

Roof duct without bends (see illustration 10, page 24).

A direct course without bends is possible to a maximum length of X=12 metres, measured from the

connection to the appliance. The minimum length is 3 metres. The outlet can be positioned anywhere

in the roof surface, whether flat or sloping; flue gas outlet and combustion air inlet are in the same

pressure area. Until 6 metres baffle - L - should be used (see page 13 ill.1 L) From 6 metres till 12 me-

tres baffle - M - and - L - should be used (see page 13 ill. 1 M -L

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet N21- INTIMO TWO TONE in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thermocet N21- INTIMO TWO TONE Manual

Product: