606548
18
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 18 von 56
3.4.3 Operation
Table 12
Designation
Values
Meaning
Function of the rotary control
Basic setpoint value
(please using the following rotary
control)
The rotary control is used to
specify the basic setpoint
value.
A setpoint value offset is
possible via Object 0.
The rotary control with the
figures is plugged back onto
the device.
Manual offset
(please using the following rotary
control)
The basic setpoint value can
be increased or decreased
using the rotary control within
the programmed limits (see
next table row).
The +/- rotary control is
plugged back onto the device.
Disabled, but object basic
setpoint value available
The rotary control does not
function (protection from
undesired operation).
The basic setpoint value can
be changed in the application
or via
Object 0.
Disabled, but object manual
offset available
The rotary control does not
function (protection from
undesired operation).
The basic setpoint value is
changed in the application
and can be increased or
decreased via Object 0.
Minimum setting on the
rotary control
10°C, 11°C, 12 °C
13°C, 14°C, 15°C
16°C, 17°C, 18°C
19 °C, 20 °C
Lowest permissible setting for
the basic setpoint value on the
rotary control.
Prevents unauthorised
individuals from adjusting it.
Maximum setting on the
rotary control
17°C, 18°C, 19°C
20°C, 21°C, 22°C
23°C, 24°C, 25°C
26°C, 27°C, 28°C
Highest permissible setting
for the basic setpoint value on
the rotary control.
Prevents unauthorised
individuals from adjusting it.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info