606548
17
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 17 von 56
Continued:
Designation
Values
Meaning
Current setpoint value in
comfort mode
Sends actual value (Heating
< > Cooling)
Sends average value between
heating and cooling
Feedback of current setpoint
value via the bus:
The setpoint value actually
being controlled is always
sent
(= current setpoint value).-{}-
Example with a basic
setpoint value of 21°C and a
dead zone of 2K:
During heating and cooling,
21°C and basic setpoint value
+ dead zone are sent
respectively (21°C + 2K =
23°C)
Same value in comfort
operation mode during both
heating and cooling operation,
i.e.:
Basic setpoint value + half
dead zone
are sent to prevent room users
becoming irritated.
Example with a basic
setpoint value of 21°C and a
dead zone of 2K:
Mean value= 21°+1K =22°C
Although control takes place
at 21
o
C
or 23°C
Sends the current setpoint
value in cycles
not cyclical, only in the
event of change
every 2 min.
every 3 min.
every 5 min.
every 10 min.
every 15 min.
every 20 min.
every 30 min.
every 45 min.
every 60 min.
How often should the
currently valid setpoint value
be sent?
Send only in the event of a
change.
Send cyclically
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info