606548
16
Zoom out
Zoom in
Previous page
1/56
Next page
Room temperature controller RAM 713 S
theben
Version: Sep-12 (subject to change) Seite 16 von 56
3.4.2 Setpoint values
Table 11
Designation
Values
Meaning
Basic setpoint value after
downloading the application
18 °C, 19 °C, 20 °C,
21 °C, 22 °C, 23 °C,
24 °C, 25 °C
Output setpoint value for the
temperature control.
Maximum valid setpoint
value offset
+/- 1 K, +/- 2 K, +/- 3 K
+/- 4 K, +/- 5 K
Limits the possible setting
range for the "setpoint offset "
function.
Applicable for the received
values above object 0 (manual
setpoint value offset).
Maximum valid basic setpoint
value
20°C, 21°C, 22°C
23°C, 24 °C, 25°C
27 °C, 30 °C, 32 °C
Should a basic setpoint value
which is higher than the set
value here be received by
Object 0, it will be limited to
this value.
Minimum valid basic setpoint
value
5°C, 6°C, 7°C, 8°C,
9°C, 10°C, 11°C, 12 °C,
13°C, 14°C, 15°C,16°C
17°C, 18°C, 19 °C, 20 °C
Should a basic setpoint value
which is lower than the set
value here be received by
Object 0, it will be limited to
this value.
Reduction in standby mode
(during heating)
0.5 K, 1 K, 1.5 K
2 K, 2.5 K, 3 K
3.5 K, 4 K
Example: with a basic
setpoint value of 21°C in
heating operation and a
2K reduction, RAM 713 S
controls at a setpoint value of
21 – 2 = 19°C
Reduction in night mode
(during heating)
3 K, 4 K, 5 K
6 K, 7 K, 8 K
By what value should the
temperature be reduced in
night mode?
Setpoint value for frost
protection operation (during
heating)
3 °C, 4 °C, 5 °C
6°C, 7 °C, 8 °C
9 °C, 10 °C
Preset temperature for frost
protection operation in
heating mode
(Heat protection operation
applies in cooling mode).
Setpoint offset is allowed*
only in comfort mode
in comfort and standby mode
in comfort, standby and night
mode
In which operation modes
should the setpoint offset
work?
This setting affects both offset
by bus telegram and by the
rotary control.
* From version 1.1 of ETS application software.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Theben RAMSES 713 S KNX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Theben RAMSES 713 S KNX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Theben RAMSES 713 S KNX

Theben RAMSES 713 S KNX User Manual - English - 1 pages

Theben RAMSES 713 S KNX User Manual - German - 56 pages

Theben RAMSES 713 S KNX User Manual - German - 1 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 57 pages

Theben RAMSES 713 S KNX User Manual - Dutch - 1 pages

Theben RAMSES 713 S KNX User Manual - French - 59 pages

Theben RAMSES 713 S KNX User Manual - French - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info