742905
73
Zoom out
Zoom in
Previous page
1/94
Next page
Device Management
- 67 -
approximately 50 seconds, while RSTP need approximately 1 second only).
The pre-conditions for implementing rapid status transition of root port and designated port
in the RSTP are given below:
Root port: Old root port on the device already stopped forwarding data, and upstream
designated port already started forwarding the data.
Designated port: Designated port is an edge port or designated port that is connected to
a point-to-point link. If the device the designated port is connected to edge port, the
device directly enter into the forwarding status; if the designated port is connected to a
point-to-point link, the device shakes hands with a downstream device, gets a response,
and immediately enters into the forwarding status.
Basic concept of RSTP
1. Edge port
Edge port is a designated port that can be set, it can be directly connected to a loop-free
network port, and it is directly connected to the terminal devices (user side) in most cases. A
port designated as edge port can rapidly transit to its forwarding status, and it does not have
to experience the listen-in and learning status. An edge port receiving a BPDU message will
become a non-edge port and an ordinary spanning tree port to participate in the
computation of spanning tree.
2. Point-to-point link
Point-to-point link is a link for direct connection between two switches.
8.3.1 Global setting of STP
Click the Device Management > STP to access the configuration page.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEF1226P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEF1226P in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info