742905

Tenda TEF1226P Manual

71
Zoom out
Zoom in
Previous page
1/94
Next page
Device Management
- 65 -
STP Computing Process
1. Initial Status
Initially, each switch regards itself as the root, and generates a configuration BPDU for each
port on it as a root, with the root path cost being 0, the ID of the designated bridge being that
of the switch, and the designated port being itself.
2. BPDU Comparison
Each switch sends out configuration BPDUs and receives a configuration BPDU on one of
its ports from another switch. The following table shows the comparing operations.
Step
Content
1
If the priority of the BPDU received on the port is lower than that of the BPDU of the
port itself, the switch discards the BPDU and does not change the BPDU of the
port.
If the priority of the BPDU is higher than that of the BPDU of the port itself, the
switch replaces the BPDU of the port with the received one.
2
The switch selects the best BPDU by comparing BPDUs on all ports.
3. Select the root bridge
The root bridge is selected by BPDU comparing. The switch with the smallest root ID will be
chosen as the root bridge.
4. Select the root port and designated port
The operation is taken in the following way:
Step
Content
1
Non-Root Bridge will receive the port of the best BPDU as the root port.
2
Using the root port BPDU and the root path cost, the switch generates a
designated port BPDU for each of its ports.
Root ID is replaced with that of the root port;
Root path is replaced with the sum of the root path cost of the root port and the
path cost between this port and the root port;
The ID of the designated bridge is replaced with that of the switch;
The ID of the designated port is replaced with that of the port.
3
The switch compares the resulting BPDU with the BPDU of the desired port whose
role you want to determine.
If the resulting BPDU takes the precedence over the BPDU of the port, the port
… 71 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEF1226P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEF1226P in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info