742905

Tenda TEF1226P Manual

72
Zoom out
Zoom in
Previous page
1/94
Next page
Device Management
- 66 -
is chosen as the designated port and the BPDU of this port is replaced with the
resulting BPDU. The port regularly sends out the resulting BPDU;
If the BPDU of this port takes the precedence over the resulting BPDU, the
BPDU of this port is not replaced and the port is blocked. The port only can
receive BPDUs.
Tip
In an STP with stable topology, only the root port and designated port can forward data, and
the other ports are blocked. The blocked ports can only receive BPDUs.
STP Timer
1. Hello Time
It specifies the interval to send BPDU packets. It is used to test the links. Hello Time ranges
from 1 to 10 seconds.
2. Max Age
If the BPDU packet is not received after the Max Age, the switch will send the BPDU packet
to all the other switches, and recalculate the spanning tree. Max Age ranges from 6 to 40
seconds.
3. Forward Delay
It means the delay time that the removing of the switch port status. Max Age ranges from 4
to 30 seconds.
When the STP regeneration caused by network malfunction occurs, the STP structure will
get some corresponding change. However, the recomputed new BPDU cannot be
immediately spread over the entire network. Allowing a newly selected root port and
designated port to start forwarding data immediately might give rise to transient loop.
Therefore, STP adopts a kind of state transition mechanism, such that the newly selected
root port and designated port cannot enter into their forwarding status before a 2-times
forwarding delay expires; the forwarding delay can ensure that the new BPDU is already
spread over the entire network.
RSTP(rapid spanning tree protocol)
RSTP (Rapid Spanning Tree Protocol) made improvements on the STP, and achieved a
rapid convergence of network topologies. Its “rapidness” reflects in such a fact that when a
port is selected to serve as root port and designated port, the delay time before it enters into
forwarding status is greatly reduced under a certain condition, so as to reduce the time for
the network to achieve its final topology stabilization (conventional STP needs
… 72 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEF1226P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEF1226P in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info