Manual Telwin DOCTOR CHARGE 50 (page 63 of 164) (English, German, French, Italian, Spanish)

649682

Zoom out

Zoom in

1/164

- 63 -

this function ( g. A.10);

- press the “VOLT” button ( g. A.21) to select the

battery voltage ( g. A.1);

- connect the clamps to the battery terminals;

- the process starts automatically, with a variable

duration depending on the battery response,

displayed in graph format. If the desulfation

process is completed successfully the word “End”

will appear on the display ( g. A.2). In the case

of highly sulphated batteries, hence irrecoverable,

this process may not be completed; this condition

is indicated when the charge phase continues

to restart and the opening/closing of a relay is

audible.

END OF PROCESS - EXAMPLE

BEEEP

Info

Alarm

3.5.2 EQUALIZATION

This process is recommended for routine battery

maintenance, to be performed periodically according

to use.

FUNCTION SELECTION

DISPLAY

ATTENTION! Pay special attention to the

typeofbatterybeingequalized(WET,GEL,AGM,

PbCa):checkthemaximumallowedvoltageto

avoiddamagingthesame.

Customising the VOLTAGE

To customise the equalization voltage value

simultaneously press and hold the “VOLT” ( g. A.21)

and “FUNCTION” ( g. A.22) buttons for 3 seconds,

then use the same buttons to select (decrease

using the “VOLT” button and increase using the

FUNCTION button), the desired voltage value

between 6V÷7.5V, 12V÷15V, 24V÷30V respectively

for 6V, 12V, 24V batteries.

The factory default voltage value is respectively

6.8V, 13.6V, 27.2V.

The set voltage mode will be exited automatically

after a 3” time-out.

VOLTAGE ADJUSTMENT - EXAMPLE

BEEEP

DISPLAY

13.3V

13.2V

13.1V

. . . . .

13.7V

13.6V

13.5V

Procedure

- press the “FUNCTION” button ( g. A.22) to select

this function ( g. A.9);

- press the “VOLT” button ( g. A.21) to select the

battery voltage ( g. A.1);

- connect the clamps to the battery terminals;

- the equalization process will run automatically

indicating the voltage value on the display ( g.

A.2), along with the current ( g. A.4) output.

On completing the process, the word “End” will

appear on the display ( g. A.2).

END OF PROCESS - EXAMPLE

BEEEP

Info

Alarm

3.6 POWER SUPPLY

The device foresees 2 operating modes

(ADVANCED PROGRAMS) as a generator

stabilised at 6/12/24V:

- DIAGNOSTIC ( g. A.13);

- SUPPLY ( g. A.12).

ADVANCED MENU SELECTION

BEEEP

ADVANCED

PROGRAMS

On completing the selected process, disconnect the

power cable from the mains socket and disconnect

the clamps from the battery terminals.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telwin DOCTOR CHARGE 50 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telwin DOCTOR CHARGE 50 Manual

Product: