649682

Telwin DOCTOR CHARGE 50 Manual

62
Zoom out
Zoom in
Previous page
1/164
Next page
- 62 -
this function ( g. A.19);
- connect the battery terminal clamps, the message
“Go” appears on the display ( g. A.2);
- press the “VOLT” button ( g. A.21) to select the
battery voltage ( g. A.1);
- start the engine;
- check the display ( g. A.2) to read the battery
starting capacity and the following status:
- “OK” - STARTING CAPACITY OK;
- “SUF” - SUFFICIENT STARTING CAPACITY;
- “BAD” - INSUFFICIENT STARTING CAPACITY.
END OF TEST - EXAMPLE
DISPLAY LEGENDA
working
sufficient insufficient
3.5 BATTERY MAINTENANCE
The device has two advanced operating modes for
the maintenance of 6/12/24V batteries (ADVANCED
PROGRAMS), press and hold the “FUNCTION”
button for 3 seconds ( g. A.22) recommended for
AGM and WET type batteries:
- DESULFATION: recovery of sulphated batteries
( g. A.10);
- EQUALIZATION: reset of optimal battery
conditions ( g. A.9).
ADVANCED MENU SELECTION
3"
BEEEP
MENU
ADVANCED
PROGRAMS
On completing the selected process, disconnect the
power cable from the mains socket and disconnect
the clamps from the battery terminals.
BUTTON LOCK. It is possible to lock and unlock the
setting by simultaneously pressing and holding the
“VOLT” ( g. A.21) and “MODE” ( g. A.23) buttons
for 3 seconds, and ( g. A.2) ( g. A.4) “LOK on” and
“LOK off” will appear respectively on the display.
KEYBOARD LOCK
3"
DISPLAY
KEYBOARD UNLOCK
3"
DISPLAY
TO EXIT THE “ADVANCED PROGRAMS” MENU:
press and hold the “FUNCTION” button ( g. A.22)
for 3 seconds.
EXIT - ADVANCED MENU
3"
BEEEP
3.5.1 DESULFATION
Pulse system used to recover sulphated batteries
by applying enough voltage to neutralise the
surface layers of oxide and revitalize the underlying
plates. It is advisable to perform this operation with
the battery disconnected from the vehicle.
FUNCTION SELECTION
DISPLAY
ATTENTION! Pay particular attention to
the nominal voltage of the battery which must
correspond to the battery selected using the “VOLT”
buttonandindicatedonthedisplay(g.A.1).
Procedure
- press the “FUNCTION” button ( g. A.22) to select
… 62 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telwin DOCTOR CHARGE 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telwin DOCTOR CHARGE 50 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info